Service Brakes, Hydraulic Vehicle Recalls

General Motors, LLC (GM) is recalling certain 2025 Chevrolet Equinox EV all-wheel drive electric vehicles. The adaptive cruise control may fail to engage the brakes as expected, due to incorrect brake module software.

Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2021-2024 E-Pace vehicles. The brake pad wear warning light may not appear on the instrument cluster as intended, failing to warn the driver that the brake pads are worn out. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

Chrysler (FCA US, LLC) is recalling certain 2017-2020 Alfa Romeo Giulia and 2018-2020 Alfa Romeo Stelvio vehicles equipped with carbon ceramic matrix brakes. During certain driving maneuvers, the brake system may exert an excessive clamp force that may fracture the rotor, decreasing the brake performance.

Porsche Cars North America, Inc. (Porsche) is recalling certain 2020-2022 Taycan vehicles. An incorrect warning indicator with an incorrect color is displayed in the instrument cluster when notifying owners of worn brake pads. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 135, "Light Vehicle Brake Systems," and 101, "Control and Displays."

General Motors. LLC (GM) is recalling certain 2019-2023 Chevrolet 4500HD, 5500HD, and 6500HD Medium-Duty trucks. The brake pressure sensor assembly may leak brake fluid into the brake pressure switch and cause an electrical short-circuit.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022 Lexus NX250, NX350, and Toyota Tundra vehicles. The Skid Control ECU within the Brake Actuator Assembly may falsely detect an overcurrent condition of the Electronic Parking Brake (EPB) Actuator and enter a failsafe mode which prevents the EPB from being engaged. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

Volkswagen Group of America, Inc. (Audi) is recalling certain 2021 Audi E-Tron Quattro and E-Tron Sportback Quattro vehicles. Corrosion in the brake booster may cause the Anti-Lock Brake System (ABS), Electronic Stability Control (ESC), speedometer display, and brake assist to stop functioning.

Honda (American Honda Motor Co.) is recalling certain 2019-2020 CB500X and CBR500R ABS motorcycles. Excessive grease in the ABS modulator may collect debris, which can get stuck in the check valve and cause a brake fluid leak.

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2021 E-Tron Quattro and 2020-2021 Audi E-Tron Sportback Quattro vehicles. An improperly welded rotor and shaft may separate within the integrated brake system.

Chrysler (FCA US, LLC) is recalling certain 2019-2021 Alfa Romeo Stelvio and 2020-2021 Alfa Romeo Giulia vehicles. Hard braking may cause the Anti-Lock Brake System (ABS) Hydraulic Control Unit (HCU) rotor shaft to separate, a reduction of braking assist, and a loss of ABS.

BMW of North America, LLC (BMW) is recalling certain 2020-2021 8 Series Coupe, Grand Coupe and convertible 840i, 840i xDrive, M850i xDrive, M8 and 740 Li, 740 Li xDrive, 750 Li xDrive, M760 Li xDrive, X6 sDrive40i, X6 xDrive40i, X6 xdrive50i, X6 M50i, X6M, and 2019-2021 X5 sDrive40i, X5 xDrive40i, X5 xDrive50i, X5 M50i, X5M, X7 xDrive40i, X7 xDrive50i, X7 M50i, and 2021 M3, M3 Competition, M4 Coupe, M4 Competition Coupe, X5 xDrive45e, 745 Le xDrive. The rotor and shaft within the integrated brake system may not have been welded properly and could separate during a hard braking event, possibly resulting in a loss of the Antilock Brake System (ABS) and braking assistance.

Porsche Cars North America, Inc. (Porsche) is recalling certain 2018 Porsche Panamera Turbo S Hybrid Executive, Panamera 4 Hybrid, Panamera Turbo S Hybrid, Panamera 4 Hybrid Executive, Panamera 4 Hybrid Sport Turismo, and Panamera Turbo S Hybrid Sport Turismo vehicles. The brake lines installed on the front axle may corrode over time. Corrosion inside the line may affect the front braking performance.

Chrysler (FCA US LLC) is recalling certain 2018 Alfa Romeo Giulia and Stelvio vehicles. The braking system on these vehicles may have been filled with contaminated brake fluid, possibly damaging the system and affecting its performance.

General Motors LLC (GM) is recalling certain 2016 Buick Envision vehicles manufactured January 19, 2016, to March 18, 2016. The the master cylinder brake lines may crack and leak brake fluid.

Subaru of America, Inc. (Subaru) is recalling certain model year 2008-2011 Impreza, 2008-2014 WRX and STI, and 2009-2013 Forester vehicles, currently, or formerly, registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia that were remedied under recall 14V-311 prior to December 23, 2014. The brake lines may experience brake line corrosion due to salt water splashing on the brake lines through a gap in the fuel tank protector.

Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2011 Outlander Sport vehicles manufactured on September 3, 2010. In the affected vehicles, the switch sleeve in the brake booster may crack and prevent the brake pedal from returning properly.

Hyundai Motor Company (Hyundai) is recalling certain model year 2011 Sonata vehicles manufactured from December 11, 2009, through September 1, 2010. The affected vehicles may experience a brake fluid leak from the two brake lines that connect the brake system's master cylinder to the Hydraulic Electronic Control Unit (HECU) due to insufficient seal between the inner brake hose and metal brake line fitting.

General Motors is recalling certain model year 2014 Chevrolet Suburban vehicles manufactured July 9, 2013, through July 22, 2013; and 2014 Chevrolet Tahoe vehicles manufactured July 16, 2013, through July 23, 2013; and model year 2014 GMC Yukon vehicles manufactured July 13, 2013, through July 18, 2013; and model year 2014 GMC Yukon XL vehicles manufactured on July 22, 2013. The rear brake caliper bolts may not be fully tightened. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 135, "Light Vehicle Brake Systems."

BMW is recalling certain model year 2007-2008 K1200 S, K1200 R, and K1200 R Sport motorcycles and 2012 and 2013 K1300 S motorcycles. In October 2012, BMW recalled 2062 2007-2008 K1200 S, K1200 R, and K1200 R Sport motorcycles. In November 2012, BMW informed the agency that it was adding model year 2012 and 2013 K1300 S (including HP Limited Edition) motorcycles to the recall campaign, representing an additional 421 units. The total number of motorcycles being recalled is now 2,483. In certain riding conditions, the brake fluid in the front brake fluid reservoir can foam.

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 LEXUS RX350 PASSENGER CARS MANUFACTURED FROM AUGUST 30, 2010, THROUGH MAY 18, 2011, AND EQUIPPED WITH VEHICLE DYNAMICS INTEGRATED MANAGEMENT (VDIM). THE CALIBRATION FOR THE HYDRAULIC CONTROL VALVES IS INCORRECT. DUE TO THIS CONDITION, THERE IS A POSSIBILITY THAT THE RIGHT FRONT WHEEL MAY NOT BE CONTROLLED PROPERLY DURING ABS (ANTILOCK BRAKE SYSTEM) OR VSC (VEHICLE STABILITY CONTROL) ACTUATION.

BMW IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 R 1200 AND K 1200 SERIES MOTORCYCLES MANUFACTURED FROM AUGUST 2006 THROUGH MAY 2009. DUE TO THE CURRENT ROUTING OF THE FRONT BRAKE LINES, IT IS POSSIBLE THAT DURING RIDING, AND THEREFORE ASSOCIATED VIBRATION. THE BRAKE LINES COULD BE UNDER STRAIN. IF THE VIBRATION/STRAIN IS SIGNIFICANT, THE BRAKE LINE COULD SPLIT AND START TO DEVELOP A LEAK.

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 JEEP WRANGLER LEFT AND RIGHT HAND DRIVE PASSENGER VEHICLES MANUFACTURED FROM MAY 15, 2006 THROUGH APRIL 22, 2010. THERE MAY BE CONTACT BETWEEN THE RIGHT AND LEFT FRONT INNER FENDER LINERS AND THE RIGHT FRONT AND LEFT REAR BRAKE TUBES WHICH COULD CAUSE WEAR OF THE TUBES CAUSING A BRAKE FLUID LEAK.

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010 CAMRYS. THE LENGTH OF THE POWER STEERING PRESSURE HOSE ON VEHICLES EQUIPPED WITH THE 4-CYLINDER (2AR-FE) ENGINE MAY BE INSUFFICIENT, SUCH THAT THE GAP BETWEEN THE CRIMP ON THE PRESSURE HOSE AND THE BRAKE TUBE FOR THE LEFT REAR BRAKE MAY BE INSUFFICIENT. UNDER THESE CIRCUMSTANCES THE BRAKE TUBE MAY INTERFERE WITH THE CRIMP AND MAY WEAR AND THEN PERFORATE.

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER SEBRING; DODGE AVENGER AND NITRO; JEEP LIBERTY, COMMANDER AND GRAND CHEROKEE; AND MODEL YEAR 2009-2010 DODGE RAM TRUCK. THESE VEHICLES MAY HAVE BEEN BUILT WITH AN IMPROPERLY FORMED OR MISSING BRAKE BOOSTER INPUT ROD RETAINING CLIP.

ELDORADO NATIONAL IS RECALLING MODEL YEAR 2008-2009 AMERIVAN MOBILITY VEHICLES BUILT ON CHRYSLER TOWN & COUNTRY AND DODGE GRAND CARAVAN PLATFORMS VEHICLES. THE REAR BRAKE LINES MAY HAVE BEEN IMPROPERLY ROUTED AND NOT SECURED PROPERLY DURING THE ALTERATION. IF NOT ROUTED AND SECURED PROPERLY, THE BRAKE LINES COULD RUB AGAINST THE VEHICLE CAUSING A BRAKE FLUID LEAK.

BMW IS RECALLING 1,535 MY 2007-2009 R1200RT MOTORCYCLES. DUE TO ROUTING AND ASSEMBLY TOLERANCES OF THE FRONT BRAKE LINES, IT IS POSSIBLE FOR THE LINES TO BE UNDER STRAIN. IN COMBINATION WITH VIBRATION DURING RIDING, THE BRAKE LINES COULD DEVELOP A LEAK. THE LEVEL OF FLUID IN THE FRONT BRAKE FLUID RESERVOIR COULD DROP RENDERING THE FRONT BRAKES INOPERATIVE.

BMW IS RECALLING 1,297 MODEL YEAR 2009 K1300 S AND K1300 GT MOTORCYCLES MANUFACTURED BETWEEN OCTOBER 1, 2008 AND MAY 1, 2009. IN CERTAIN RIDING CONDITIONS INVOLVING INCREASED VIBRATION, THE BRAKE FLUID IN THE FRONT RESERVOIR CAN FOAM.

CERTAIN SPORT UTILITY VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, 'PASSENGER CAR BRAKE SYSTEMS.' THE BRAKE FLUID RESERVOIR CAP IS MISSING PART OF THE REQUIRED BRAKE FLUID WARNING.

CERTAIN PASSENGER VEHICLES EQUIPPED WITH 2.7 LITER ENGINES AND MK25E BRAKING SYSTEMS MAY EXHIBIT INADEQUATE CLEARANCE BETWEEN THE REAR BRAKE TUBES AND THE EXHAUST GAS RECIRCULATION TUBE. CONTACT BETWEEN THE BRAKE TUBES AND EXHAUST GAS RECIRCULATION TUBE OVER AN EXTENDED PERIOD OF TIME MAY CAUSE THE BRAKE TUBES TO WEAR THROUGH AND CAUSE A BRAKE FLUID LEAK.

ON CERTAIN MOTORCYCLES, IF CERTAIN PROCEDURES ARE PERFORMED THAT INVOLVES REMOVAL OF THE FRONT LEFT BRAKE CALIPER, THE ABS SENSOR CABLE CAN BE ROUTED INCORRECTLY AND WHEN THE CALIPER IS REINSTALLED, THE SENSOR CABLE CAN COME INTO CONTACT AND RUB AGAINST THE FRONT BRAKE DISC. OVERTIME, IF THE CHAFING BECOMES SEVERE, IT IS POSSIBLE TO LOSE THE ABS FUNCTION.

CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK.

CERTAIN PASSENGER VEHICLES MAY HAVE BEEN FITTED WITH A DEFECTIVE BRAKE BOOSTER ASSEMBLY.

CERTAIN TRUCKS, SPORT UTILITY VEHICLES, AND VANS EQUIPPED WITH BOSCH HYDRO-BOOST BRAKE ASSEMBLIES, THE HYDRAULIC BRAKE BOOSTER PRESSURE ACCUMULATOR MAY CRACK AND SEPARATE FROM THE HYDRO-BOOST ASSEMBLY DURING NORMAL OPERATING CONDITIONS.

CERTAIN MOTORCYCLES EQUIPPED WITH COMBINED-BRAKE SYSTEMS HAVE A PROPORTIONING CONTROL VALVE (PCV) THAT MECHANICALLY PROPORTIONS BRAKE FORCE WHEN THE REAR BRAKE IS APPLIED. A SEAL IN SOME PCVS IS IMPROPERLY SHAPED, AND BRAKE FLUID LEAKAGE MAY OCCUR.

CERTAIN PASSENGER VEHICLES WERE PRODUCED WITH LOWER THAN SPECIFIED TORQUE ON BOTH FRONT BRAKE CALIPER TO STEERING KNUCKLE ATTACHMENT BOLTS. WITH IMPROPER TORQUE, THE CLAMP LOAD AT THE JOINT MAY NOT BE ADEQUATE TO PREVENT MOVEMENT BETWEEN THE CALIPER BRACKET AND KNUCKLE.

CERTAIN SPORT UTILITY VEHICLES, PICKUP TRUCKS, AND PASSENGER VANS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, ?PASSENGER CAR BRAKE SYSTEMS.? SOME OF THESE VEHICLES WERE PRODUCED WITH AN OUT-OF-SPECIFICATION BRAKE HYDRO-BOOST HOUSING RELIEF VALVE BORE.

ON CERTAIN MOTORCYCLES, THE SCREWS THAT ATTACH THE REAR BRAKE CALIPER TO THE REAR SWING ARM WERE NOT TIGHTENED CORRECTLY DURING ASSEMBLY. THE SCREWS COULD LOOSEN DURING VEHICLE OPERATION AND EVENTUALLY FALL-OUT, ALLOWING THE REAR CALIPER TO SEPARATE FROM ITS MOUNT.

VEHICLE DESCRIPTION: MOTORCYCLES. THE DISTANCE BETWEEN THE BRAKE LINE AND THE SPEEDOMETER DRIVE CABLE COULD BE TOO SMALL. DUE TO COMPRESSION AND REBOUND OF THE FORK, THE SPEEDOMETER CABLE COULD CONTACT AND CHAFE THE BRAKE LINE.