Service Brakes, Hydraulic › Fluid Vehicle Recalls

Volkswagen Group of America, Inc. (Audi) is recalling certain 2021 Audi S7, S6 Sedan, RS7, RS6 Avant, A6 Allroad, 2019-2021 A7, and A6 Sedan vehicles. An incorrectly labeled brake fluid cap may have been installed, which can result in the use of the wrong type of brake fluid.

General Motors, LLC (GM) is recalling certain 2022 Cadillac XT6 vehicles. The brake fluid reservoir cap may be missing the warning label. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 135, "Light Vehicle Brake Systems."

Daimler Vans USA, LLC (DVUSA) is recalling certain 2016-2021 Mercedes-Benz Metris vehicles. The brake fluid reservoir may be incorrectly mounted, which can allow it to detach.

Hyundai Motor America (Hyundai) is recalling certain 2021 Palisade vehicles. The brake fluid may be contaminated, which can cause the brake master cylinder inner-cup seals to swell, and reduce braking performance.

BMW of North America, LLC (BMW) is recalling certain Motorcycle Accessory Brake Fluid Reservoir Covers, part numbers 8405-752, 8405-753, 8405-754 and 9829547 designed to fit certain 2019-2020 BMW R 1250 motorcycles, and part numbers 8404-098, 8405-100, 8405-102, and 1542056 designed to fit certain 2018-2020 BMW Rnine T motorcycles. The brake fluid reservoir cap may not clearly state the required type of brake fluid and the process for filling the reservoir, possibly leading to an improper maintenance procedure. As such, these caps fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 122, "Motorcycle Brake Systems."

BMW of North America, LLC (BMW) is recalling certain 2018-2020 RnineT Scrambler and RnineT, 2020 R1250R and R1250RS, 2019-2020 Rnine T Pure, R1250GS,R1250GS Adventure and R1250RT and 2018 RnineT Racer motorcycles. The brake fluid reservoir cap may not clearly state the required type of brake fluid and the process for filling the reservoir, possibly leading to an improper maintenance procedure. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 122, "Motorcycle Brake Systems."

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2017 Passat vehicles. Brake fluid may leak slowly from the some of the brake line connections, resulting in a low brake fluid level.

General Motors LLC (GM) is recalling certain model year 2009-2010 Chevrolet Aveo and 2009 Pontiac G3 vehicles. The vehicles may contain brake fluid which does not protect against corrosion of the valves inside the anti-lock brake system (ABS) module, affecting the closing motion of the valves.

Jaguar Land Rover North America, LLC (Jaguar) is recalling certain model year 2013-2014 XF vehicles manufactured October 18, 2012, through February 25, 2014. In the affected vehicles, the right-hand rear brake pipe may wear against a bracket located on the rear sub frame. This condition may cause the brake pipe to wear through and leak brake fluid.

Hyundai is recalling certain model year 2009-2012 Genesis vehicles manufactured April 30, 2008, through March 28, 2012. The vehicles may contain brake fluid which does not protect against corrosion of the Hydraulic Electronic Control Unit (HECU).

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2012 DODGE JOURNEY AND FIAT 500 VEHICLES MANUFACTURED FROM OCTOBER 24, 2011, THROUGH OCTOBER 26, 2011. SOME VEHICLES WERE ASSEMBLED WITH CONTAMINATED BRAKE FLUID AND MAY EXPERIENCE A DEGRADATION OF THE SEALING COMPONENTS WITHIN THE BRAKE SYSTEM.

ON CERTAIN MOTORCYCLES, DURING LONG PERIODS OF RIDING AT SUSTAINED HIGH ENGINE RPM, VIBRATION WITHIN THE BRAKE FLUID RESERVOIR CAN CAUSE THE BRAKE FLUID TO FOAM. THIS COULD ALLOW AIR TO ENTER THE FRONT BRAKE SYSTEM WHICH COULD LEAD TO A LOSS OF FRONT BRAKING EFFICIENCY.

CERTAIN 2003-2005 MODEL YEAR 4500/5500 SERIES CHEVROLET KODIAK, SCHOOL BUS CHASSIS, AND GMC TOPKICK VEHICLES; AND 2003-2004 MODEL YEAR GMC SCHOOL BUS CHASSIS VEHICLES EQUIPPED WITH AN 8.1L ENGINE AND HYDROMAX BRAKE SYSTEM. THE POWER STEERING HOSE MAY COME INTO CONTACT WITH A PORTION OF THE INTERMEDIATE STEERING SHAFT. A HOLE COULD BE WORN IN THE HOSE AND A LOSS OF HYDRAULIC FLUID WOULD OCCUR.