Structure › Frame And Members Vehicle Recalls

American Honda Motor Company (Honda) is recalling certain 2016-2022 Honda Pilot, 2017-2023 Ridgeline, 2019-2023 Passport, and 2014-2020 Acura MDX vehicles that were sold in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, or Wisconsin. The rear subframe may corrode at the suspension mounting points, which can result in rear suspension component failure.

Ford Motor Company (Ford) is recalling certain 2025 Explorer and Aviator vehicles. A mounting bolt for the front subframe may have been tightened improperly.

Honda (American Honda Motor Co.) is recalling certain 2007-2011 CR-V vehicles that were sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Washington D.C., and Wisconsin. An accumulation of road salt may cause the frame to corrode and possibly detach the rear trailing arm.

Chrysler (FCA US, LLC) is recalling certain 2020-2022 Jeep Wrangler vehicles. A stud on the frame assembly may puncture the fuel tank in a crash, which can result in a fuel leak.

General Motors, LLC (GM) is recalling certain 2022-2023 Chevrolet Malibu vehicles. The front impact bar, a structural portion of the vehicle frame, may not be properly welded to the front frame rail.

Ford Motor Company (Ford) is recalling certain 2022 Lincoln Aviator and Ford Explorer vehicles. The engine rails may have been improperly heat-treated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection" and 301, "Fuel System Integrity."

Honda (American Honda Motor Co.) is recalling certain 2006-2014 Ridgeline vehicles that were sold, or ever registered in Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Washington D.C., and Wisconsin. An accumulation of road salt may cause the frame mounting surface, where the fuel tank mounting bands are attached, to corrode and possibly detach the fuel tank, which can result in a fuel leak.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2008-2010 Lancer, 2009-2010 Lancer Sportback, 2008-2013 Outlander, and 2011-2016 Outlander Sport vehicles originally sold in, or ever registered in, Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.

Honda (American Honda Motor Co.) is recalling certain 2019-2020 CR-V vehicles. The rear subframe bolts were improperly manufactured and may loosen, allowing the rear subframe to separate.

General Motors LLC (GM) is recalling certain 2020 Buick Enclave and Chevrolet Traverse vehicles. The right-hand frame rail in the engine compartment may be cracked.

Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Wrangler vehicles. The rear under body ladder rail may corrode, possibly reducing the strength of the rear floor pan and causing the left rear seat mount to become loose.

BMW of North America, LLC (BMW) is recalling certain 2014-2017 R NINE T motorcycles. The bolts that connect the right-side swingarm pivot pin to the frame may loosen.

BMW North America, LLC (BMW) is recalling certain model year 2016 BMW M2 Coupe vehicles, 2015-2017 M3 Sedan vehicles and 2015-2016 M4 Coupe and M4 Convertible vehicles. During servicing of the rear differential for a prior service action, the rear sub-frame bolts may have been reused instead of being replaced. Reuse of the existing bolts may cause the bolts to loosen.

Hyundai Motor Company (Hyundai) is recalling certain model year 2010-2012 Elantra Touring vehicles manufactured December 15, 2009, through May 7, 2012. The affected vehicles have a support bracket attached to the headliner that may become displaced during a side curtain airbag deployment.

Mazda North American Operations (Mazda) is recalling certain model year 2001-2004 Tribute vehicles manufactured May 22, 2000, through December 19, 2003, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm.

Ford Motor Company (Ford) is recalling certain model year 2001-2004 Escape vehicles manufactured October 22, 1999, through January 23, 2004, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm.

VOLVO IS RECALLING CERTAIN MODEL YEAR 2011 S40 PASSENGER VEHICLES. A CRACK ON THE TOP SIDE OF THE PASSENGER SIDE SUPPORT MEMBER IN THE ENGINE COMPARTMENT MAY HAVE DEVELOPED DURING THE FORMING PROCESS IN COMPONENT PRODUCTION.

HONDA IS RECALLING CERTAIN MODEL YEAR 2002 VTX1800 MOTORCYCLES MANUFACTURED BETWEEN AUGUST 14 AND OCTOBER 4, 2001. THE SWINGARM MAY NOT HAVE BEEN PROPERLY WELDED.

ON CERTAIN PASSENGER VEHICLES, THE METAL FORMING PART OF THE FRONT CROSSMEMBER MAY HAVE BEEN IMPROPERLY STAMPED RESULTING IN THE METAL BECOMING THINNER IN THE CROSS-SECTION THAN SPECIFIED. THIS COULD, OVER TIME, RESULT IN BREAKAGE OF THE CROSSMEMBER.

ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.

ON CERTAIN SPORT UTILITY VEHICLES, AN INCORRECT WELD NUT WAS INSTALLED. LACK OF THIS BOLT COULD EVENTUALLY CAUSE THE SUBFRAME TO CRACK OR BECOME DEFORMED.

CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." DURING TESTING, THE 3-DOOR HATCHBACK EXCEEDED THE PERFORMANCE CRITERION IN THE STANDARD MIDWAY ALONG THE LENGTH OF THE WINDSHIELD SUPPORT PILLAR (A-PILLAR).

VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FMVSS NO. 208, "OCCUPANT CRASH PROTECTION," AND NO. 214, "SIDE IMPACT PROTECTION." THESE VEHICLES MAY HAVE WELDS NEAR THE LOWER DRIVER'S SIDE DOOR HINGE THAT DO NOT MEET SPECIFICATIONS.

VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES (NON-SUNROOF ONLY) FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT."

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT SUB FRAME ASSEMBLY HAS NOT BEEN ADEQUATELY WELDED.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. CERTAIN VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." THE RESULTANT HIC(D) VALUE AT ONE TARGET LOCATION AP1, LOCATED ON THE TRIM PANEL AT THE JUNCTURE OF THE A-PILLAR AND ROOF SIDE RAIL, MAY BE GREATER THAN DESIGN INTENT.

VEHICLE DESCRIPTION: MINIVANS. THE FRONT BODY/FRAME IS MISSING SPOT WELDS.