Suspension › Front › Control Arm › Lower Arm Vehicle Recalls

Ford Motor Company (Ford) is recalling certain 2024-2025 Bronco vehicles. The front lower control arm fasteners may not have been tightened properly, allowing the control arm to detach from the frame.

Honda (American Honda Motor Co.) is recalling certain 2024 Prologue vehicles. The right front lower control arm may contain a manufacturing defect that can cause it to fracture.

General Motors, LLC (GM) is recalling certain 2024 Chevrolet Blazer EV vehicles. The right front lower control arm may contain a manufacturing defect that can cause it to fracture.

Kia America, Inc. (Kia) is recalling certain 2023 Forte vehicles. The right front lower control arm may have been improperly welded, which can cause it to fail.

Kia America, Inc. (Kia) is recalling certain 2023 Forte vehicles. The right front lower control arm may have been improperly welded, which can cause it to fail.

Subaru of America, Inc. (Subaru) is recalling certain 2023 Ascent vehicles. The left or right front lower control arm may have an improperly tightened ball joint castle nut which can result in retention pin failure and separation of the ball joint from the lower control arm.

Subaru of America, Inc. (Subaru) is recalling certain 2021 Impreza vehicles. The left-front lower control arm weld may fail, allowing the control arm to separate from the crossmember.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2013-2015 Outlander Sport vehicles originally sold, or ever registered, in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The front lower control arms may detach due to the front cross member corroding from salt water exposure, such as from road salt use.

Chrysler (FCA US LLC) is recalling certain 2021 Jeep Cherokee Latitude and Jeep Cherokee Limited vehicles. One or both of the front lower control arms may fracture while driving.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 RAV4 and RAV4 Hybrid vehicles. The front lower suspension arms may have cracks, which may result in the suspension arm separating from the front wheel assembly.

Chrysler (FCA US LLC) is recalling certain 2020 Jeep Wrangler vehicles. The left side lower control arm bracket and weld may not be correctly positioned.

Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica and Pacifica hybrid vehicles. The right front lower control arm may separate from the steering knuckle.

BMW of North America, LLC (BMW) is recalling certain 2018 BMW X5 xDrive35i, X5 xDrive50i, X5 xDrive35d, and X6 sDrive35i vehicles. The pivot bolt on the front lower-left control arm may not have been properly hardened, which may cause the control arm to break.

Chrysler (FCA US LLC) is recalling certain 2018 Jeep Compass vehicles. The front lower control arms may be incorrectly welded, potentially resulting in a control arm separation.

Mazda North American Operations (Mazda) is recalling certain 2004 Mazda RX-8 vehicles. The ball joint socket on the front suspension lower control arm may crack and the ball joint may separate from the socket.

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2002-2007 Lancer, 2004 Lancer Wagon, 2003-2006 Lancer Evolution, 2003-2006 Outlander and 2007-2013 Outlander V-6 vehicles originally sold in, or ever registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may detach due to the front cross member corroding from salt water exposure such as from road salt use.

Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 and originally sold in, or currently registered in Alaska, Connecticut, Delaware, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, Nebraska, New Hampshire, New Jersey, New York, North Dakota, Ohio, Pennsylvania, Rhode Island, South Dakota, Utah, Vermont, West Virginia, Wisconsin and the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion from salt water exposure such as from road salt use.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Camry, Camry HV, Avalon, and Avalon HV vehicles equipped with 16-inch and 17-inch rims. In the affected vehicles, the left-side front suspension lower arm may have been incorrectly manufactured. As a result, the left side lower arm may not have enough clamping surface area for one of the bolts that secures the lower arm to the lower ball joint.

General Motors LLC (GM) is recalling certain model year 2014 Spark vehicles manufactured from May 7, 2014, to May 26, 2014. In the affected vehicles, the left and right lower control arm attaching bolts in the front suspension may not be tightened to specification.

Hyundai America Technical Center, Inc. (Hyundai) is recalling certain model year 2007-2008 Hyundai Entourage vehicles manufactured from February 16, 2006, through June 30, 2008 and sold in, or currently registered in, Massachusetts, Maryland, Michigan, New Hampshire, New York, Pennsylvania, Vermont, Wisconsin, Connecticut, Delaware, Iowa, Illinois, Indiana, Maine, Minnesota, Missouri, New Jersey, Ohio, Rhode Island, West Virginia and the District of Columbia. In the affected vehicles, the front lower control arms may fracture due to corrosion resulting from exposure to road salt and water.

Kia Motors Corporation (Kia) is recalling certain model year 2006-2012 Kia Sedona vehicles manufactured from June 15, 2005, through August 14, 2012 originally sold in, or currently registered in Massachusetts, Maryland, Michigan, New Hampshire, New York, Pennsylvania, Vermont, Wisconsin, Connecticut, Delaware, Iowa, Illinois, Indiana, Maine, Minnesota, Missouri, New Jersey, Ohio, Rhode Island, West Virginia or the District of Columbia. In the affected vehicles, the front lower control arms may break due to corrosion resulting from prolonged exposure to salty environments.

General Motors (GM) is recalling certain model year 2008-2012 Chevrolet Impala police vehicles because the front lower control arms may fracture. This safety recall does not include non-police Chevrolet Impala vehicles.

HONDA IS RECALLING CERTAIN MODEL YEAR 2006 CR-V VEHICLES. THE WELD STRENGTH ATTACHING THE SUB-FRAME BUSHING COLLAR TO THE PASSENGER-SIDE FRONT LOWER ARM IS INSUFFICIENT. THE COLLAR CAN SEPARATE FROM THE ARM DUE TO VIBRATION WHILE DRIVING.

SUBARU IS RECALLING CERTAIN MODEL YEAR 2002-2007 IMPREZA, MODEL YEAR 2003-2008 FORESTER, AND MODEL YEAR 2005-2006 SAAB 9-2X VEHICLES MANUFACTURED FROM SEPTEMBER 5, 2000 THROUGH NOVEMBER 26, 2007 ORIGINALLY SOLD, OR CURRENTLY REGISTERED IN, MASSACHUSETTS, MARYLAND, MICHIGAN, NEW HAMPSHIRE, NEW YORK, PENNSYLVANIA, VERMONT, WISCONSIN, CONNECTICUT, DELAWARE, IOWA, ILLINOIS, INDIANA, MAINE, MINNESOTA, MISSOURI, NEW JERSEY, OHIO, RHODE ISLAND, WEST VIRGINIA AND THE DISTRICT OF COLUMBIA. THE FRONT LOWER CONTROL ARMS MAY BREAK AT THE HANGER BRACKETS DUE TO CORROSION IF THE HANGER BRACKET IS EXPOSED TO SALTY AND HUMID ENVIRONMENTS SUCH AS ROADS CONTAINING SNOW MELTING AGENT.

FEDERAL-MOGUL IS RECALLING CERTAIN REPLACEMENT CONTROL ARM ASSEMBLIES, PART NUMBERS K7425, 10945, FA4510X, K7427, 10946, AND FA4611X, SOLD FOR USE ON VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE BALL JOINT ON THE CONTROL ARM ASSEMBLY CAN FAIL CAUSING THE BALL STUD TO WEAR THROUGH THE CONTROL ARM HOUSING RESULTING IN NOISE AND/OR SEPARATION OF THE BALL STUD FROM THE HOUSING.

NISSAN IS RECALLING CERTAIN FRONT AND REAR LOWER LINKS, P/NOS. 54501ZQ00A, 54500ZQ00A, 551A1ZQ00A, 551A0ZQ00A , 54501EA00A, 54500EA00A, 551A1EA500, 551A0EA500, 54501ZR00A, AND 54500ZR00A, SOLD BETWEEN NOVEMBER 25, 2009 AND MAY 14, 2010 AS REPLACEMENT PARTS FOR MODEL YEAR 2004 THROUGH 2010 TITAN, ARMADA, AND QX56, AND MODEL YEARS 2005 THROUGH 2010 FRONTIER, XTERRA, AND PATHFINDER VEHICLES. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2010 TITAN, ARMADA, QX56, FRONTIER, XTERRA, AND PATHFINDER VEHICLES MANUFACTURED FROM NOVEMBER 19, 2009 THROUGH MARCH 3, 2010. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.

ON CERTAIN PASSENGER VEHICLES, THE PIN AT THE END OF THE FRONT SUSPENSION TRANSVERSE LINK (LOWER CONTROL ARM) COULD BREAK WHERE IT IS MOUNTED TO THE FRAME.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. ONE OR MORE OF THE THREE BOLTS USED TO ATTACH EACH FRONT SUSPENSION LOWER CONTROL ARM TO THE BODY ON THE LEFT AND RIGHT SIDES MAY NOT HAVE BEEN PROPERLY MANUFACTURED.

VEHICLE DESCRIPTION: MINIVANS. THE LOWER CONTROL ARM PIVOT BOLT COULD FRACTURE.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. UNDER CERTAIN CIRCUMSTANCES THE FRONT LOWER CONTROL ARM BRACKETS MAY FRACTURE. THIS FRACTURE COULD RESULT IN SEPARATION OF THE FRONT LOWER CONTROL ARM FROM THE FRAME.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE REAR SUSPENSION LOWER ARMS AND/OR CONTROL ARMS COULD BREAK DUE TO IMPROPER WELDING.

VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. THE WELDS AT THE RIGHT SIDE LOWER CONTROL ARM BRACKET TO AXLE TUBE ATTACHMENT MAY HAVE INADEQUATE FATIGUE LIFE DUE TO POOR WELD QUALITY. THIS CAN LEAD TO SEPARATION OF THE CONTROL ARM BRACKET FROM THE AXLE TUBE.

PASSENGER VEHICLES. IN SHARP HIGH SPEED TURNS OR ABRUPT LANE CHANGE MANEUVERS AT SPEEDS SUBSTANTIALLY ABOVE POSTED SPEED LIMITS, AND DEPENDING UPON ROAD CONDITIONS, PRECISE STEERING RESPONSE MAY BE DEMANDED TO RETAIN DIRECTIONAL STABILITY.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT SUSPENSION LOWER CONTROL ARMS MAY HAVE BEEN INADEQUATELY WELDED BETWEEN THE PIVOT TUBE AND THE ARM.