Visibility › Windshield Vehicle Recalls

Nissan North America, Inc. (Nissan) is recalling certain 2025 Sentra vehicles. The windshield glass may have visible air bubbles, which can obscure the driver's visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials."

Ford Motor Company (Ford) is recalling certain 2025-2026 Lincoln Corsair, Lincoln Aviator, and Explorer vehicles. The windshield glass may have visible air bubbles, which can obscure the driver's visibility. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials."

Nissan North America, Inc. (Nissan) is recalling certain 2024 Nissan Sentra vehicles. The windshield may have air bubbles on the front lower driver's side, which can obscure the Vehicle Identification Number (VIN). As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 205, "Glazing Materials."

General Motors, LLC (GM) is recalling certain 2023 GMC Acadia and 2024 Cadilac XT5 and XT6 vehicles. The windshield may have been assembled without the proper urethane sealant required to bond the windshield to the vehicle body.

BMW of North America, LLC (BMW) is recalling certain 2023 X5 sDrive40i, xDrive40i, xDrive45e, and X7 xDrive40i vehicles. The windshield may not have been properly bonded to the vehicle which could allow water to enter the vehicle and contact electrical components, possibly resulting in a short-circuit.

Subaru of America, Inc. (Subaru) is recalling certain 2022 Impreza and Outback vehicles. The incorrect paint clearcoat may have been applied, which can cause the windshield to be insufficiently bonded to the vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

Ford Motor Company (Ford) is recalling certain 2022 Bronco and Ranger vehicles. The windshield may not have been properly bonded to the vehicle, which could allow it to detach during a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

Ford Motor Company (Ford) is recalling certain 2016 and 2020 Transit Connect vehicles. The front windshield may have been manufactured with inadequate adhesion to the vehicle body structure.

Kia Motors America (Kia) is recalling all 2014-2016 Cadenza vehicles. During manufacturing, the front windshield may not have been properly bonded to the vehicle, allowing it to detach.

Hyundai Motor America (Hyundai) is recalling certain 2020-2021 Santa Fe, 2021 Sonata, and Elantra vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash.

Chrysler (FCA US, LLC) is recalling certain 2020-2021 Dodge Challenger, Dodge Charger, and Chrysler 300 vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 212, "Windshield Mounting."

Hyundai Motor America (Hyundai) is recalling certain 2018 Hyundai Genesis G80 and Genesis G90 vehicles. The windshield and rear window on these vehicles may have been installed with incorrect primer, potentially reducing the glass bonding strength.

Porsche Cars North America, Inc. (Porsche) is recalling certain 2017 911 Carrera Cabriolet, 911 Carrera 4 Cabriolet, 911 Carrera 4S Cabriolet, 911 Carrera S Cabriolet, 911 Targa S, 911 Targa 4S, 911 Turbo Cabriolet, 718 Boxter and 718 Boxter S vehicles. During manufacturing, the windshield may not have been properly bonded to the vehicle, allowing it to detach in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 212, "Windshield Mounting."

FCA US LLC (Chrysler) is recalling certain model year 2015-2016 Chrysler Town and Country, and 2014-2015 Dodge Grand Caravan vehicles manufactured August 16, 2014, to December 5, 2015. The windshield on the affected vehicles may have been installed using expired urethane primer, allowing the windshield to become displaced in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 212, "Windshield Mounting."

Pilkington North America, Inc. (Pilkington) is recalling certain replacement windshields, model FW04026 GTY, manufactured November 23, 2015, to December 16, 2015 for use in Mazda CX-5 vehicles that are equipped with the Smart City Brake Support system. The affected windshields have a bracket mounted on the inside to hold a laser sensor or LIDAR device for the Smart City Brake Support system. These brackets were improperly affixed with only tape instead of tape and urethane and therefore may loosen.

Ford Motor Company (Ford) is recalling certain model year 2015 Lincoln MKC vehicles manufactured August 20, 2013, to June 6, 2014. The affected vehicles may have visible air bubbles in the windshield glass. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 205, "Glazing Materials."

Land Rover is recalling certain model year 2012 Range Rover vehicles. During the manufacturing process, the windshields on these vehicles may have been installed incorrectly.

FORD IS RECALLING CERTAIN MODEL YEAR 2012 F-650 AND F-750 VEHICLES MANUFACTURED FROM FEBRUARY 1, 2012 THROUGH MARCH 16, 2012. THE CLEAR AND BLACK PRIMER MAY BE MISSING ON CERTAIN WINDSHIELDS WHICH MAY RESULT IN AN INSUFFICIENT BOND BETWEEN THE GLASS AND CAB STRUCTURE.

Ford Motor Company (Ford) is recalling certain model year 2011 Ford E-150, E-250, E-350, and E-450 vehicles built from May 12, 2011, through May 26, 2011. Due to improper manufacturing conditions, some of the windshields may form bubbles after an extended time in hot temperatures. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 205, "Glazing Materials."

BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 AND X6 SPORT ACTIVITY VEHICLES MANUFACTURED BETWEEN DECEMBER 14, 2009 AND DECEMBER 16, 2009. IN THE UPPER RIGHT AREA OF THE WINDSHIELD, BONDING MAY BE INSUFFICIENT OVER A LENGTH OF APPROXIMATELY 50CM.

CHRYSLER IS RECALLING 494 MY 2008 JEEP LIBERTY VEHICLES. THE WINDSHIELD AND/OR FIXED REAR QUARTER GLASS MAY HAVE BEEN ASSEMBLED USING INCORRECT URETHANE ADHESIVE. THIS COULD AFFECT GLASS RETENTION.

CERTAIN VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING." AN INCORRECT PRIMER MAY HAVE BEEN USED WHEN INSTALLING THE WINDSHIELD. THE SAME PRIMER MAY HAVE ALSO BEEN APPLIED TO THE LIFTGATE GLASS AND THE SIDE STATIONARY GLASS.

CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING.' THE WINDSHIELD MAY NOT BE PROPERLY SECURED TO THE VEHICLE BODY.

CERTAIN SPORT UTILITY VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING.' THE WINDSHIELD URETHANE BEAD MAY NOT HAVE ADHERED TO THE BODY IN CERTAIN AREAS DURING THE CURE PROCESS.

CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING." THE WINDSHIELDS MAY POTENTIALLY EXHIBIT INCREASED WIND NOISE, WATER LEAKAGE, AND SQUEAKS AND RATTLES.

CERTAIN PICKUP TRUCKS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, "WINDSHIELD MOUNTING." SOME OF THESE VEHICLES LACK A CONTINUOUS URETHANE BONDING BEAD BETWEEN THE BODY SURFACE AND THE WINDSHIELD.