Skip to main content
MyRecallCheckNHTSA recall explorer

NHTSA model-year recall report

2000 Chrysler Sebring Recalls

6 campaigns in our verified NHTSA snapshot, with source consequences, remedies, and VIN-specific next steps.

Check exact VIN status Decode a VIN

6

NHTSA campaigns

4

Affected systems

0

Urgent advisories

Jul 7, 2009

Latest campaign date

At a glance

What the record says

This model year's count is above the Chrysler Sebring average of 5.0 campaigns per listed year. That is context only—not proof that this year is safer or less safe.

The most frequent affected category is Exterior Lighting, appearing in 2 campaigns.

  1. 1

    Read

    Review every campaign and urgent instruction below.

  2. 2

    Verify

    Check your exact VIN with NHTSA or the manufacturer.

  3. 3

    Repair

    Contact an authorized dealer if a campaign applies.

Source campaign records

All 2000 Chrysler Sebring recall campaigns

Shown newest first. NHTSA summary, consequence, and remedy text is preserved without truncation.

NHTSA campaign 09E043000

Equipment

Manufacturer: IMPORT PRODUCTS CO., INC.

Reported Jul 7, 2009

What is recalled

IMPORT PRODUCTS IS RECALLING 30,351 FUEL FILTERS SOLD TO AND BRANDED BY THE AFFINIA GROUP AS CARQUEST P/N 86523, NAPA P/N 3523, AND WIX P/N 33523 FOR USE AS REPLACEMENT EQUIPMENT ON THE VEHICLES LISTED ABOVE. THESE FILTERS MAY DEVELOP A LEAK IN THE HOSE ASSEMBLY AND/OR CONNECTORS DUE TO IMPROPERLY ADHERED LINE CONNECTORS.

Safety consequence

THIS CONDITION MAY RESULT IN A VEHICLE FIRE.

Manufacturer remedy

THE AFFINIA GROUP WILL NOTIFY OWNERS AND THE FILTERS WILL BE REPLACED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON AUGUST 1, 2009. OWNERS MAY CONTACT WIX FILTER RETURN CENTER AT 1-704-869-7411 OR IMPORT PRODUCTS AT 1-508-279-8207.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 09E012000

Exterior Lighting

Manufacturer: SABERSPORT

Reported Apr 7, 2009

What is recalled

SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Safety consequence

DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.

Manufacturer remedy

SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 07E055000

Fuel System, Gasoline › Delivery › Fuel Pump

Manufacturer: AIRTEX PRODUCTS

Reported Jul 26, 2007

What is recalled

CERTAIN AIRTEX FUEL PUMP MODULE ASSEMBLIES, P/N E7081H, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE WALL OF THE FLARED FITTING OF THE FUEL PUMP IS NOT THICK ENOUGH TO PREVENT THE MATING THREADED FITTINGS FROM BOTTOMING OUT BEFORE AN ADEQUATE SEAL IS ACHIEVED. THIS CONDITION MAY RESULT IN LEAKAGE OF FUEL AT THE CONNECTION OF THE VEHICLE FUEL LINE AND THE FUEL PUMP MODULE ASSEMBLY.

Safety consequence

IN THE PRESENCE OF AN IGNITION SOURCE, A FUEL LEAK COULD RESULT IN A FIRE.

Manufacturer remedy

AIRTEX WILL NOTIFY OWNERS AND REPLACE THE FUEL PUMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2007. OWNERS CAN CONTACT AIRTEX AUTOMOTIVE AT 800-880-3056.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 06E088000

Fuel System, Gasoline › Delivery › Fuel Pump

Manufacturer: TI GROUP AUTOMOTIVE SYSTEMS, LLC

Reported Oct 23, 2006

What is recalled

CERTAIN TIGAS FUEL PUMP MODULES MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006, SOLD UNDER VARIOUS BRAND NAMES AND P/NOS. THESE FUEL PUMP MODULES ARE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.

Safety consequence

FUEL RESTRICTION COULD RESULT IN LOSS OF POWER AND/OR ENGINE STALL, POSSIBLY RESULTING IN A VEHICLE CRASH.

Manufacturer remedy

TI AUTOMOTIVE WILL NOTIFY OWNERS AND REPLACE THE DEFECTIVE FUEL PUMP MODULES FREE OF CHARGE. THE RECALL BEGAN ON OCTOBER 6, 2006. OWNERS MAY CONTACT TI AUTOMOTIVE TOLL-FREE AT 1-877-461-1834.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 06E064000

Exterior Lighting

Manufacturer: TRADESONIC

Reported Jul 17, 2006

What is recalled

CERTAIN TRADESONIC COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Safety consequence

LACK OF AMBER SIDE REFLECTORS IN THE LAMPS WILL DECREASE LIGHTING VISIBILITY TO OTHER DRIVERS AND MAY POSSIBLY RESULT IN A VEHICLE CRASH.

Manufacturer remedy

TRADESONIC WILL NOTIFY OWNERS AND REPLACE THE LAMPS FREE OF CHARGE. THE RECALL IS EXPECTED TO BEGIN DURING JULY 2006. OWNERS MAY CONTACT TRADESONIC AT 626-934-8884.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 00V421002

Suspension › Front › Control Arm › Lower Ball Joint

Manufacturer: DAIMLERCHRYSLER CORPORATION

Reported Dec 18, 2000

What is recalled

VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. ALSO, MMC HAS ADDED THE POTENTIAL OF LEAKING MOISTURE, WHICH CAN CAUSE THE BALL STUD TO CORRODE.

Safety consequence

THIS CONDITION COULD CAUSE THE LOWER LATERAL ARM BALL JOINT TO SEPARATE, INCREASING THE RISK OF A VEHICLE CRASH. THIS CAMPAIGN SUPERCEDES MMC'S PREVIOUS SAFETY RECALL CAMPAIGN, SEE 99V-066.

Manufacturer remedy

DEALERS WILL INSPECT THE LOWER LATERAL ARM BALL JOINT FOR WEAR. BALL JOINTS THAT EXHIBIT WEAR BEYOND THE ESTABLISHED TOLERANCE WILL BE REPLACED WITH NEWLY DESIGNED LATERAL ARM BALL JOINTS. BALL JOINTS THAT ARE WITHIN THE ESTABLISHED TOLERANCE WILL BE CLEANED AND A SPECIAL SEALANT WILL BE APPLIED TO PREVENT INTRUSION OF MOISTURE.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

Other Chrysler Sebring model years

Compare campaign histories within the same model. Counts are descriptive, not a safety grade.

20111 campaign20103 campaigns20092 campaigns20084 campaigns20077 campaigns20062 campaigns20056 campaigns20047 campaigns20035 campaigns20025 campaigns
View all model years

Other 2000 Chrysler recall reports

2000 Chrysler Cirrus9 campaigns2000 Chrysler Concorde8 campaigns2000 Chrysler 300M7 campaigns2000 Chrysler LHS5 campaigns2000 Chrysler Sebring Convertible2 campaigns2000 Chrysler Sebring Sedan1 campaign

2000 Chrysler Sebring recall questions

How many recalls does the 2000 Chrysler Sebring have?

This verified dataset contains 6 NHTSA campaigns associated with the 2000 Chrysler Sebring. A campaign can apply to some, not all, vehicles of the same model year.

Does this confirm an open recall for my 2000 Chrysler Sebring?

No. This page is a model-year campaign history. Use NHTSA's official lookup or an authorized dealer to confirm whether a campaign applies to your exact VIN and whether the repair remains open.

Are vehicle recall repairs free?

When a safety recall campaign applies to your VIN, the manufacturer remedy is generally provided at no charge through an authorized dealer. Confirm eligibility and scheduling with the manufacturer or dealer.

Source: NHTSA. Dataset includes campaigns through Jul 30, 2026. Last processed Aug 8, 2026. Methodology