Skip to main content
MyRecallCheckNHTSA recall explorer

NHTSA model-year recall report

2000 Subaru Legacy Recalls

4 campaigns in our verified NHTSA snapshot, with source consequences, remedies, and VIN-specific next steps.

4

NHTSA campaigns

4

Affected systems

0

Urgent advisories

Nov 29, 2013

Latest campaign date

At a glance

What the record says

This model year's count is below the Subaru Legacy average of 7.9 campaigns per listed year. That is context only—not proof that this year is safer or less safe.

The most frequent affected category is Fuel System, Gasoline › Delivery › Fuel Pump, appearing in 1 campaign.

  1. 1

    Read

    Review every campaign and urgent instruction below.

  2. 2

    Verify

    Check your exact VIN with NHTSA or the manufacturer.

  3. 3

    Repair

    Contact an authorized dealer if a campaign applies.

Source campaign records

All 2000 Subaru Legacy recall campaigns

Shown newest first. NHTSA summary, consequence, and remedy text is preserved without truncation.

NHTSA campaign 13E065000

Fuel System, Gasoline › Delivery › Fuel Pump

Manufacturer: Airtex Products, LP

Reported Nov 29, 2013

What is recalled

Airtex Products LP (Airtex) is recalling certain model E8598M, E8518M, E8600M, E8596M, and E8597M fuel pumps manufactured July 26, 2013, and July 29, 2013 and used as aftermarket replacements on Subaru Baja's, Outback's and Legacy's. The affected fuel pumps were sold or installed into the aftermarket applications on or after July 26, 2013, and may may leak fuel from the base of a fuel line connection when the gas tank is full.

Safety consequence

A fuel leak in the presence of an ignition source increases the risk of a fire.

Manufacturer remedy

Airtex will notify owners, and will replace the fuel pump, free of charge. Recall is expected to begin on January 2, 2014. Customers may contact Airtex at 1-800-880-3056. The recall is expected to begin during January 2014. This recall is being conducted by Airtex, not by Subaru.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 03V153000

Suspension › Rear

Manufacturer: SUBARU OF AMERICA, INC.

Reported Apr 22, 2003

What is recalled

THIS RECALL APPLIES TO CERTAIN PASSENGER VEHICLES ORIGINALLY SOLD IN OR CURRENTLY REGISTERED IN THE STATES OF CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, IOWA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, MISSOURI, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, VIRGINIA, WEST VIRGINIA, WISCONSIN, AND THE DISTRICT OF COLUMBIA. CERTAIN REAR SUSPENSION SUBFRAME COMPONENTS WERE PRODUCED WITH POOR PAINT QUALITY WHICH, AFTER CONTINUED EXPOSURE TO CORROSIVE ROAD SALTS FOR A PERIOD OF SEVERAL YEARS, COULD RESULT IN RUST-OUT OF THE COMPONENT AND POSSIBLE BREAKAGE OF THE SUBFRAME.

Safety consequence

IF SUCH BREAKAGE OCCURS WHILE THE VEHICLE IS BEING OPERATED, CONTROL OF THE VEHICLE COULD BE AFFECTED, INCREASING THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL CLEAN AND RUST-PROOF THE REAR SUSPENSION SUBFRAME. OWNER NOTIFICATION BEGAN JULY 14, 2003. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT SUBARU AT 1-800-782-2783.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 00V091000

Steering › Linkages › Tie Rod Assembly

Manufacturer: SUBARU OF AMERICA, INC.

Reported Mar 24, 2000

What is recalled

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE LEFT-SIDE STEERING KNUCKLE ARM WAS INCORRECTLY ASSEMBLED.

Safety consequence

THIS CONDITION COULD RESULT IN A LOSS OF STEERING CONTROL.

Manufacturer remedy

DEALERS WILL INSPECT THE TORQUE ON THE LEFT SIDE TIE-ROD END CASTLE NUT AND INSTALL A NEW COTTER PIN.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 99V249000

Power Train › Driveline › Center Support Bearing

Manufacturer: SUBARU OF AMERICA, INC.

Reported Sep 17, 1999

What is recalled

VEHICLE DESCRIPTION: SEDAN L MODEL PASSENGER VEHICLES. ANTI-RUST COATING WAS INCORRECTLY APPLIED TO THE TRANSVERSE LINK MOUNTING SURFACE OF THE VEHICLE BODY. OVER TIME THE COATING SHRINKS, CAUSING A TORQUE DECREASE OF THE BOLT THAT SECURES THE TRANSVERSE LINK BRACKET TO THE VEHICLE BODY.

Safety consequence

THIS CAN RESULT IN LOOSENING OF THE BRACKET AND SUBSEQUENT SEPARATION OF THE TRANSVERSE LINK FROM THE VEHICLE FRAME.

Manufacturer remedy

DEALERS WILL INSPECT THE VEHICLES AND, IF NECESSARY, REMOVE THE ANTI-RUST COATING UNDER THE MOUNTING LOCATION OF THE LEFT TRANSVERVE LINK MOUNTING BRACKET BOLT AND RETORQUE THE MOUNTING BOLT TO THE REQUIRED TORQUE.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

Other Subaru Legacy model years

Compare campaign histories within the same model. Counts are descriptive, not a safety grade.

View all model years

Other 2000 Subaru recall reports

2000 Subaru Legacy recall questions

How many recalls does the 2000 Subaru Legacy have?

This verified dataset contains 4 NHTSA campaigns associated with the 2000 Subaru Legacy. A campaign can apply to some, not all, vehicles of the same model year.

Does this confirm an open recall for my 2000 Subaru Legacy?

No. This page is a model-year campaign history. Use NHTSA's official lookup or an authorized dealer to confirm whether a campaign applies to your exact VIN and whether the repair remains open.

Are vehicle recall repairs free?

When a safety recall campaign applies to your VIN, the manufacturer remedy is generally provided at no charge through an authorized dealer. Confirm eligibility and scheduling with the manufacturer or dealer.

Source: NHTSA. Dataset includes campaigns through Jul 30, 2026. Last processed Aug 8, 2026. Methodology