Power Train › Axle Assembly Vehicle Recalls

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2026 Lexus TX Plug-In Hybrid, TX Hybrid, TX, Toyota Grand Highlander Hybrid, and Grand Highlander vehicles. The rear axle carriers may have been manufactured with insufficient material strength and could break.

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2025 E 350, E 350 4MATIC, E 450 4MATIC, and E450 4MATIC station wagon vehicles. The camber strut bracket may have been improperly welded onto the rear axle carrier, possibly resulting in separation of the bracket from the rear axle carrier.

Toyota Motor Engineering & Manufacturer (Toyota) is recalling certain 2022-2023 Tacoma vehicles. The axle shaft sub-assembly may separate from the axle housing due to debris causing improperly secured fasteners.

Ford Motor Company (Ford) is recalling certain 2023 F-150, Expedition, and Lincoln Navigator vehicles. The front axle pinion may not have been heat-treated, which can cause it to fracture.

Ford Motor Company (Ford) is recalling certain 2020-2021 Explorer Police FHEV, Explorer Police 3.3L, and 2020-2022 Explorer 2.3L RWD, 3.0L PHEV, 3.3L FHEV, and 3.0L ST GAS vehicles. The rear axle horizontal mounting bolt may fracture and cause the driveshaft to disconnect.

Porsche Cars North America, Inc. (Porsche) is recalling certain 2013-2015 Boxster, 2013-2014 Boxster S, 2014-2015 Cayman, Cayman S, 2015 Boxster GTS, and Cayman GTS vehicles. The rear-axle carrier side sections may fracture.

Ford Motor Company (Ford) is recalling certain 2020-2021 F-350 Super Duty pickup trucks equipped with 6.7L diesel engines and Dana model 275 rear axles. The rear axle housing may not support the load of the pickup truck and deform, which could result in driveshaft separation.

Chrysler (FCA US LLC) is recalling certain 2018-2019 RAM 1500 trucks. The rear differential may have been insufficiently filled, possibly resulting in its failure.

Daimler Vans USA, LLC (DVUSA) is recalling certain 2016 Mercedes Benz Metris vehicles manufactured from September 1, 2015, through December 31, 2015. The affected vehicles have rear differential gears that may have been improperly welded.

FORD IS RECALLING CERTAIN MODEL YEAR 1998-2003 WINDSTAR VEHICLES MANUFACTURED FROM SEPTEMBER 1, 1997, THROUGH JULY 3, 2003, AND CURRENTLY REGISTERED OR ORIGINALLY SOLD IN VIRGINIA. OVER TIME, CORROSION CAN WEAKEN THE REAR AXLE MAKING IT SUSCEPTIBLE TO TORSIONAL STRESS. CORROSION AND STRESS CAN LEAD TO CRACKS WHICH, IF UNDETECTED, CAN INCREASE AND RESULT IN A COMPLETE FRACTURE OF THE AXLE.

FORD IS RECALLING CERTAIN MODEL YEAR 2011 F-650 TRUCKS, MANUFACTURED FROM FEBRUARY 2, 2011, THROUGH FEBRUARY 17, 2011, AND EQUIPPED WITH A MERITOR MFS08 FRONT STEER AXLE. THE BOLTS ATTACHING THE STEERING ARM TO THE STEERING KNUCKLE WERE NOT PROPERLY TIGHTENED. THIS CONDITION CAN RESULT IN THE STEERING ARM LOOSENING OR SEPARATING.

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010-2011 JEEP WRANGLER VEHICLES MANUFACTURED FROM JULY 12, 2010, THROUGH SEPTEMBER 10, 2010. SOME VEHICLES MAY EXPERIENCE A DEGRADATION OF FASTENER TORQUE FOR VARIOUS FRONT AND REAR AXLE ATTACHMENTS TO THE CHASSIS MODULE.

BMW IS RECALLING 754 MY 2009 F800 GS VEHICLES. THE AXLE SHAFT WALL THICKNESS MAY NOT HAVE BEEN MANUFACTURED ACCORDING TO SPECIFICATIONS.

ON CERTAIN TRUCKS BUILT WITH DANA REAR AXLES, THE REAR AXLE MAY HAVE A HOUSING THAT WAS BUILT USING STEEL THAT WAS THINNER THAN SPECIFIED.

ON CERTAIN TRUCKS, THE REAR DRIVE AXLE HOUSING WAS MANUFACTURED WITH STEEL BELOW THE SPECIFIED THICKNESS AND, AS A RESULT, IT COULD DEVELOP A CRACK.

ON CERTAIN TRUCKS, THE AXLE HOUSINGS MAY HAVE BEEN MANUFACTURED WITH STEEL THAT WAS OUT OF SPECIFICATION WHICH COULD RESULT IN A FATIGUE FAILURE OVER TIME.

ON CERTAIN TRUCKS EQUIPPED WITH ARVINMERITOR SERIES 145 AND 160 REAR DRIVE AXLES. SOME OF THE SPINDLES WERE OVERHEATED DURING THE HEAT TREAT PROCESS WHICH COULD RESULT IN A FRACTURE OF THE SPINDLE.

ON CERTAIN 4X4 PICKUP TRUCKS, THE REAR AXLE FLANGE WELD TO THE AXLE TUBE COULD FATIGUE AND ALLOW THE BRAKE CALIPER ASSEMBLY TO ROTATE.

ON PASSENGER VEHICLES WITH VEHICLE IDENTIFICATION NUMBERS (VIN) STARTING WITH 1NX ONLY AND BUILT FROM JANUARY 8 THROUGH FEBRUARY 13, 2002, IT IS POSSIBLE FOR THE BOLTS THAT JOIN THE REAR BRAKE AND HUB ASSEMBLY TO THE REAR AXLE CARRIER TO BE LOOSE DUE TO INSUFFICIENT TIGHTENING DURING THE ASSEMBLY PROCESS.

ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS, THE FORWARD AND/OR REAR DRIVE AXLE UPPER AXLE SEAT CAN BREAK ALLOWING THE AXLE TO SHIFT OUT OF ALIGNMENT.