Seat Belts › Front › Anchorage Vehicle Recalls

Hyundai Motor America (Hyundai) is recalling certain 2023-2025 Hyundai Ioniq 6, 2023-2026 Genesis G90, 2024-2026 Hyundai Santa Fe, and Hyundai Santa Fe Hybrid vehicles. The driver and passenger seat belt anchors may detach.

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2025 Audi RS Q8, Audi Q8, Audi Q7, and Audi SQ8 vehicles. The driver and front passenger seat belt buckles may be missing a rivet that secures the buckle to the seat belt stalk.

Volvo Trucks North America (Volvo Trucks) is recalling certain 2019-2026 VAH trucks. The passenger seat belt anchor may fail due to inadequate floor reinforcement. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 210, "Seat Belt Assembly Anchorages."

Rivian Automotive, LLC (Rivian) is recalling certain 2022-2025 R1T and R1S vehicles. The D-ring bolts for one or both front seat belt anchorage assemblies may not have been properly installed.

General Motors, LLC (GM) is recalling certain 2023-2024 GMC Hummer EV pick up, 2024 GMC Hummer EV SUV, and 2024 Chevrolet Silverado EV vehicles. The left or right front seat belt buckle attachment bolts may not be tightened properly.

Porsche Cars North America, Inc. (Porsche) is recalling certain 2022 911 GT3 vehicles. The screw that attaches the lower seat belt anchor to the seat frame may not have been tightened properly.

Rivian Automotive, LLC (Rivian) is recalling certain 2022 R1T and R1S vehicles. The front seat belt anchors may have been inadequately attached to the B-pillar.

Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.

Nissan North America, Inc. (Nissan) is recalling certain 2018 Infiniti QX30 vehicles. The bolt securing the right-hand side lower seat belt anchorage may have been incorrectly installed during production. This can result in the lower seat belt anchorage detaching in a crash. As such, these vehicles fail to comply with certain requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages", number 209, "Seat Belt Assemblies, and number 208, "Occupant Crash Protection."

Hyundai Motor America (Hyundai) is recalling certain 2017 Santa Fe Sport vehicles. In the affected vehicles, the bolt for the driver's seat belt anchor might not have been sufficiently tightened during assembly.

Hyundai Motor America (Hyundai) is recalling certain 2011-2014 Sonata and 2011-2015 Sonata Hybrid vehicles. In the affected vehicles, the seat belt linkages for both front seat belts may detach from the seat belt anchor pretensioners.

Midwest Automotive Designs, LLC (Midwest) is recalling certain model year 2016 Mercedes Benz Sprinter 2500 and 3500 vehicles manufactured July 1, 2016, to September 30, 2016, equipped with certain left side seat adjusters, model number 486077 manufactured by Atwood. The affected seat adjusters may allow the seats to move in the event of a crash. As such, these adjusters fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages", and 207 "Seating Systems."

Ford Motor Company (Ford) is recalling certain model year 2016 Ford Fusion vehicles manufactured from March 10, 2016, through March 16, 2016. The front driver seat track assembly's rear riser may have been improperly welded to the seat track rail, and as a result, the driver may not be adequately restrained in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 207, "Seating Systems" and 210, "Seat Belt Assembly Anchorages."

General Motors LLC (GM) is recalling certain model year 2015 Chevrolet Cruze vehicles manufactured September 24, 2014, to May 29, 2015. In the affected vehicles, one of the driver-side seat belt assembly bolts may not be properly tightened.

Ford Motor Company (Ford) is recalling certain model year 2011-2013 and 2015 Ford F-650, and F-750 trucks manufactured February 14, 2011, to April 28, 2015, and equipped with a 70% fixed bench passenger seat. The affected vehicles have passenger seat belt anchorage floor attachments that are not installed in the correct location. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."

Ford Motor Company (Ford) is recalling certain model year 2014 Ford Transit Connect vehicles manufactured November 6, 2013, to September 20, 2014. In the affected vehicles, the upper seat belt bolts may have been improperly torqued, allowing them to loosen over time.

Toyota is recalling certain model year 2007 through 2013 FJ Cruiser passenger vehicles. The retractors for the front driver and passenger seat belts are mounted in the access door (rear door) panels of the vehicle. Due to insufficient strength of the access door panel, cracks may develop in the panel if the access door is repeatedly and forcefully closed over an extended period of time.

GM IS RECALLING CERTAIN MODEL YEAR 2009-2010 CHEVROLET IMPALAS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." THE FRONT SAFETY BELT WEBBING MAY NOT HAVE BEEN PROPERLY SECURED TO THE LAP BELT ANCHOR PRETENSIONER MOUNTED TO THE SIDE OF THE SEAT NEAREST THE DOOR.

PORSCHE HAS NOTIFIED NHTSA OF A DEFECT IN CERTAIN MODEL YEAR 2010 PANAMERA S, 4S AND TURBO 4-DOOR SEDAN. IF THE FRONT SEATS ARE ADJUSTED TOWARDS AN EXTREME POSITION, RESULTING IN UNFAVORABLE TOLERANCE OF THE MATING COMPONENTS, IT IS POSSIBLE THAT THE FUNCTION OF THE LOCKING MECHANISM OF THE SEAT BELT MOUNT CAN NO LONGER BE GUARANTEED. THE SEAT BELT MOUNT COULD DETACH FROM THE ANCHORING SYSTEM WHEN THE SEAT BELT IS FASTENED OR OPENED.

ON CERTAIN PASSENGER VEHICLES, SOME FRONT SEAT BELT ANCHORS MAY HAVE BEEN INSTALLED WITH AN INCORRECT WASHER, WHICH COULD RESTRICT ANCHOR MOVEMENT. AS A RESULT, THE SEAT BELT MAY BE IMPROPERLY POSITIONED FOR CERTAIN OCCUPANTS.

CERTAIN PICKUP TRUCKS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." AN AREA ON THE REAR PILLAR WHERE THE REAR SEAT BELT UPPER ANCHOR IS ATTACHED MAY NOT BE SUFFICIENTLY ENERGY ABSORBENT.

CERTAIN EXTENDED AND REGULAR CAB PICKUP TRUCKS AND CARGO VANS CONVERTED TO COMPRESSED NATURAL GAS (CNG) FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 225, 'CHILD RESTRAINT ANCHORAGE SYSTEMS.' THESE VEHICLES HAVE ONE SEATING POSITION, THE CENTER REAR SEAT, EQUIPPED WITH CHILD RESTRAINT LOWER ANCHORAGES.

ON CERTAIN PASSENGER VEHICLES, ANALYSIS OF AN A SIDE IMPACT CRASH TEST CONDUCTED BY THE NHTSA;S NEW CAR ASSESSMENT PROGRAM (NCAP) INDICATED THAT THE OUTBOARD ANCHORAGE OF THE DRIVER'S SEAT BELT COULD DISCONNECT BECAUSE OF CONTACT BETWEEN THE SEAT TRIM AND THE ANCHORAGE CONNECTOR WHEN THE SEAT WAS ADJUSTED TO ITS LOWEST POSITION.

CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH AN OPTIONAL TWO-MAN PASSENGER BENCH SEAT FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." ON THE TWO-MAN PASSENGER BENCH SEAT INBOARD (CENTER) POSITION, SEAT BELT D-RING MOUNTING BRACKET WELDNUT, THE WELD IS NOT SUFFICIENT TO MEET THE SEAT BELT PULL REQUIREMENTS .

VEHICLE DESCRIPTION: QUAD CAB PICKUP TRUCKS. THE FRONT OUTBOARD LOWER SEAT BELT ANCHOR BOLTS MAY NOT BE TIGHTENED CORRECTLY.

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH RACING OPTION (ACR OR GT2). THE 5-POINT RACING SEAT BELT HARNESS, WHICH IS OPTIONAL EQUIPMENT ON THE VIPER MAY NOT MEET THE VOLUNTARY LOAD SPECIFICATIONS SET FORTH BY THE FIA (FEDERATION INTERNATIONALE DE L'AUTOMOBILE).

VEHICLE DESCRIPTION: SEDANS AND WAGONS. THE REAR OUTBOARD SEAT BELT ANCHORAGE BOLTS MAY HAVE BEEN INCORRECTLY TIGHTENED.

VEHICLE DESCRIPTION: WAGONS. THE BOLTED JOINT, USED FOR ATTACHING THE BRACKET THAT IS PART OF THE INSTALLATION HARDWARE FOR THE ISOFIX-TYPE CHILD RESTRAINT, MAY HAVE BEEN INCORRECTLY TIGHTENED.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE SAFETY BELT LOWER OUTBOARD ANCHORAGE BOLT ON THE DRIVER'S AND FRONT PASSENGER'S SEATS MAY NOT HAVE BEEN SECURED PROPERLY.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE CHILD SAFETY SEAT ANCHOR LATCH (ISO-FIX ANCHOR) FASTENERS DO NOT HAVE ADEQUATE RESIDUAL TORQUE. THE ANCHORS ARE SECURED TO THE FLOOR PAN WITH A REINFORCEMENT PLATE THAT HAS TWO STUDS THAT EXTEND UPWARD THROUGH THE FLOOR PAN AND THE ISO-FIX ANCHOR. THE SEALER ON THE FLOOR PAN COULD CAUSE A SOFT JOINT AND, EVEN IF THE NUTS ARE PROPERLY TORQUED, ROAD VIBRATIONS COULD CAUSE THE NUT TO WORK ITS WAY COMPLETELY OFF THE STUD.

VEHICLE DESCRIPTION: PASSENGER VEHICLES USING AFTERMARKET FRONT PASSENGER SIDE SEAT BELT ASSEMBLIES THAT WERE SOLD BY FORD PARTS DEPARTMENTS FROM JANUARY 1, THROUGH JUNE 13, 2000. THESE SEAT BELT ASSEMBLIES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE EQUIPMENT INVOLVED IS SERVICE STOCK SEAT BELT ASSEMBLIES, MODEL NOS. H 9977, H 9979, T 9063, AND T 9217, BUILT BY TRW VEHICLE SAFETY SYSTEMS, INC. (TRW) MANUFACTURED FROM JUNE 1, 1998 THROUGH MAY 21, 2000. SOME OF THESE SEAT BELT ASSEMBLIES MAY HAVE BEEN INSTALLED AS SERVICE REPLACEMENT EQUIPMENT ON THE VEHICLES INVOLVED IN THE RECALL.

VEHICLE DESCRIPTION: PASSENGER VEHICLES USING AFTERMARKET DRIVER'S SEAT BELT ASSEMBLIES THAT WERE SOLD BY FORD PARTS DEPARTMENTS FROM JANUARY 1, THROUGH JUNE 13, 2000. THESE SEAT BELT ASSEMBLIES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 209, "SEAT BELT ASSEMBLIES." THE EQUIPMENT INVOLVED IS SERVICE STOCK SEAT BELT ASSEMBLIES, MODEL NOS. H 9977, H 9979, T 9063, AND T 9217, BUILT BY TRW VEHICLE SAFETY SYSTEMS, INC. (TRW) MANUFACTURED FROM JUNE 1, 1998 THROUGH MAY 21, 2000. SOME OF THESE SEAT BELT ASSEMBLIES MAY HAVE BEEN INSTALLED AS SERVICE REPLACEMENT EQUIPMENT ON THE VEHICLES INVOLVED IN THE RECALL.

VEHICLE DESCRIPTION: CONVERTIBLE PASSENGER VEHICLES. WHEN THE CONVERTIBLE TOP IS DOWN AND THE SEAT IS PUSHED ALL THE WAY BACK, THE SEAT BELTS MAY NOT RETRACT PROPERLY RESULTING IN SLACK IN THE SEAT BELTS.

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT RETRACTOR MAY HAVE A PIN SHAFT IN THE SWITCHABLE ELR/ALR MECHANISM THAT IS INCORRECTLY FORMED. IN SOME CIRCUMSTANCES, THE SWITCHING MECHANISM COULD BECOME NONFUNCTIONAL, PREVENTING THE SEAT BELT WEBBING FROM BEING EXTRACTED FROM THE RETRACTOR. IT IS ALSO POSSIBLE THAT MALFUNCTION OF THE MECHANISM COULD PREVENT THE BELT FROM BEING SWITCHED INTO THE ALR MODE. THE ELR MECHANISM IS NOT AFFECTED BY THIS CONDITION.