Service Brakes, Hydraulic › Pedals And Linkages Vehicle Recalls

Volkswagen Group of America, Inc. (Audi) is recalling certain 2019-2023 Audi E-Tron Quattro, 2020-2023 Audi E-Tron Sportback, 2024 Q8 E-Tron, Q8 Sportback E-Tron, SQ8 E-Tron, and SQ8 Sportback E-Tron vehicles. The fastener that connects the brake pedal and the brake booster may have been improperly assembled during manufacturing, which can cause the brake pedal to detach from the brake booster.

Ford Motor Company (Ford) is recalling certain 2025 F-550 SD, F-450 SD, F-350 SD, and F-250 SD vehicles. The brake booster pushrod retaining spring may not have been installed, which can allow the pushrod to disconnect from the brake pedal and cause a sudden loss of brake function. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 135, "Light Vehicle Brake Systems" and 105, "Hydraulic and electric brake systems."

Honda (American Honda Motor Co.) is recalling certain 2021-2025 Acura TLX, 2023-2025 Acura MDX, and 2023-2025 Honda Pilot vehicles. The brake pedal pivot pin was not secured properly, which can cause the pedal to shift out of position. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard numbers 108, "Lamps, Reflective Devices, and Associated Equipment" and 135, "Light Vehicle Brake Systems."

Chrysler (FCA US, LLC) is recalling certain 2019-2020 Alfa Romeo Giulia and Alfa Romeo Stelvio vehicles. The fastener that connects the brake pedal and the brake booster may have been improperly assembled during manufacturing, which can cause the brake pedal to detach from the brake booster.

Volvo Car USA, LLC (Volvo Car) is recalling certain 2020 S60, V60, S90I, XC60 and XC90 hybrid vehicles. The pushrod screw joint, connecting to the brake pedal to the hydraulic brake unit, may be loose.

Chrysler (FCA US, LLC) is recalling certain 2024-2025 Dodge Hornet and Alfa Romeo Tonale vehicles. The brake pedal may collapse and cause a loss of brake function.

Volkswagen Group of America, Inc. (Audi) is recalling certain 2019-2024 Audi E-Tron and 2020-2024 Audi E-Tron Sportback vehicles. The fastener that connects the brake pedal and the brake booster may have been improperly assembled during manufacturing, which can cause the brake pedal to detach from the brake booster.

Ford Motor Company (Ford) is recalling certain 2024 Mustang vehicles. The brake pedal assembly may have been manufactured incorrectly, which can result in a loose brake pedal.

Ford Motor Company (Ford) is recalling certain 2014-2015 Fusion, Lincoln MKZ, and 2015 Mustang vehicles originally sold or ever registered, in Texas, Louisiana, Mississippi, Alabama, Florida, Georgia, South Carolina, North Carolina, Virginia and Hawaii. Exposure to certain environmental conditions, such as high temperatures, high humidity, and salt air can cause the brake pedal bumper to corrode and separate from the brake pedal.

Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles. The retaining washer and bolt that connect the brake pedal to the bearing block, may come loose and detach. This could cause the brake lights to stay illuminated, even when the brake pedal is not pressed.

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2020 Audi Q3 vehicles. The brake pedal plate can bend or detach under the pressure applied during sudden stopping.

Ford Motor Company (Ford) is recalling certain 2020 Mustang vehicles equipped with automatic transmissions. The brake pedal bracket may fracture during sudden stopping.

Subaru of America, Inc. (Subaru) is recalling certain 2020 Outback and Legacy vehicles. The brake pedal mounting bracket may have a missing or insufficiently tightened bolt.

Chrysler (FCA US LLC) is recalling certain 2019 Ram 1500 vehicles equipped with adjustable pedals. The affected vehicles have a brake pedal that may move too far and separate from pedal assembly.

General Motors LLC (GM) is recalling certain 2015-2016 Chevrolet Silverado 2500, 3500, 1500 Crew Cab Special Service, Tahoe Police Pursuit/Special Service, GMC Sierra 2500, and 3500 vehicles. The brake pedal pivot nut may loosen, causing the brake pedal to be loose or inoperative.

Kia Motors America (Kia) is recalling certain 2012-2014 Forte and Forte Koup vehicles. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released. This will allow the brake lights to remain illuminated continuously. It can also allow the shift lever to be moved without depressing the brake pedal, or activate the engine management brake pedal override feature.

Hyundai Motor Company (Hyundai) is recalling certain 2013-2014 Elantra sedan, coupe and GT vehicles. The brake pedal stopper pad can deteriorate allowing the brake light switch plunger to remain extended when the brake pedal is released. This will allow the brake lights to remain illuminated continuously. It can also allow the shift lever to be moved without depressing the brake pedal, or activate the engine management brake pedal override feature.

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2011-2016 Touareg vehicles. The brake pedal pivot pin may be missing a securing clip, allowing the pivot pin to move and the brake pedal to dislodge.

Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2011-2016 Cayenne vehicles manufactured April 28, 2010, to January 11, 2016. The brake pedal pivot pin may be missing a circlip, allowing the pivot pin to move and the brake pedal to dislodge.

General Motors LLC (GM) is recalling certain model year 2015-2016 Chevrolet Silverado 1500, 2500, and 3500 heavy duty trucks manufactured October 1, 2013, to February 1, 2016, 2015-2016 Chevrolet Tahoe Police Pursuit Vehicles (PPV) manufactured March 1, 2014, to February 1, 2016, and 2015-2016 GMC Sierra 2500 and 3500 heavy duty trucks manufactured October 29, 2013, to February 1, 2016. On the affected vehicles, the brake pedal pivot nut may loosen, causing the brake pedal to be loose or inoperative.

General Motors LLC (GM) is recalling certain model year 2015 Cadillac ATS and CTS vehicles. The affected vehicles have a bracket between the brake pedal assembly and the rod that actuates the brakes that may fracture during normal brake pedal operation.

FORD IS RECALLING CERTAIN MODEL YEAR 2013 ESCAPE VEHICLES MANUFACTURED FROM MARCH 8, 2012 THROUGH JUNE 7, 2012. DUE TO MIS-POSITIONED CARPET PADDING THE CENTER CONSOLE TRIM PANEL MAY BE PUSHED OUTBOARD OF THE INTENDED POSITION, REDUCING CLEARANCE RELATIVE TO THE PEDAL PACKAGE.

KIA IS RECALLING CERTAIN MODEL YEAR 2009 BORREGO VEHICLES, MANUFACTURED FROM MAY 2, 2008, THROUGH JANUARY 20, 2009, EQUIPPED WITH NON-ADJUSTABLE BRAKE PEDALS. CERTAIN PEDAL MOUNTS MAY HAVE A FIBERGLASS COMPOSITION THAT ALLOWS THEM TO BREAK OFF IN A COLLISION WHERE THE IMPACT HAS NOT IMMOBILIZED THE VEHICLE, WHICH WOULD THEN ALLOW THE VEHICLE TO ROLL.

SUBARU IS RECALLING CERTAIN MODEL YEAR 2012 IMPREZA SEDANS AND WAGONS (EXCEPT WRX/STI MODELS), MANUFACTURED FROM APRIL 21, 2011, THROUGH NOVEMBER 15, 2011, AND LEGACY AND OUTBACK VEHICLES MANUFACTURED FROM OCTOBER 17, 2011, THROUGH NOVEMBER 23, 2011. THESE VEHICLES MAY BE EQUIPPED WITH A BRAKE MASTER CYLINDER THAT COULD MALFUNCTION AND CAUSE AN INCREASE IN THE AMOUNT OF BRAKE PEDAL TRAVEL DISTANCE REQUIRED TO SLOW OR STOP THE VEHICLE.

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 SIENNA VEHICLES. THE BRAKE STOP LAMP SWITCH IS MOUNTED ON A SMALL BRACKET WELDED ON THE LEFT SIDE OF THE SERVICE BRAKE PEDAL SUPPORT ASSEMBLY. DUE TO ITS PROXIMITY TO THE PARKING BRAKE PEDAL, IN LIMITED CIRCUMSTANCES THE STOP LAMP SWITCH BRACKET COULD BE DAMAGED BY THE OPERATOR'S FOOT DURING PARKING BRAKE APPLICATION.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.

ON CERTAIN PASSENGER VEHICLES, THE CLIP THAT SECURES THE BRAKE PUSHROD TO THE BRAKE PEDAL ARM PIN COULD HAVE BEEN BENT WHEN IT WAS INSTALLED. A BENT CLIP MAY COME OFF, ALLOWING THE BRAKE BOOSTER PUSHROD TO SEPARATE FROM THE BRAKE PEDAL.

ON CERTAIN SPORT UTILITY VEHICLES, THE BRAKE PEDAL PUSHROD RETAINER MAY BE MISSING. IF THE RETAINER IS MISSING, THE BRAKE BOOSTER PUSHROD COULD DISENGAGE FROM THE BRAKE PEDAL.

ON CERTAIN MOTORCYCLES, THE REAR BRAKE LINKAGE IS SUSCEPTIBLE TO CORROSION WHICH CAN CAUSE BINDING AND ROUGH BRAKE OPERATION. AS CORROSION INCREASES, IT CAN CAUSE A STICKING PEDAL OR REQUIRE HIGH BRAKE PEDAL EFFORT.

ON CERTAIN TRUCKS, THE SWITCH RETAINER HOLDING THE BRAKE BOOSTER PUSH ROD AND THE BRAKE PEDAL TOGETHER COULD BE MISSING.

CERTAIN PASSENGER VEHICLES EQUIPPED WITH ADJUSTABLE PADELS ARE BEING RECALLED IN ORDER TO ADJUST THE BRAKE AND ACCELERATOR PEDALS TO A MINIMUM OF 50 MM OF LATERAL SEPARATION. SIMULTANEOUS APPLICATION OF BOTH THE BRAKE AND ACCELERATOR PEDALS COULD RESULT IN AN INCREASE IN ENGINE RPM.

ON CERTAIN PASSENGER VEHICLES, DUE TO A MANUFACTURING PROBLEM, THE BRAKE PEDAL ARM PIVOT SHAFT COULD LOOSEN FROM ITS SUPPORT BRACKET.

VEHICLE DESCRIPTION: F-SUPER DUTY STRIPPED MOTOR HOME CHASSIS BECAUSE THEY MAY HAVE A MISSING OR PARTIALLY INSTALLED BRAKE PEDAL TO MASTER CYLINDER PUSHROD RETAINING CLIP.