Steering › Gear Box › Shaft Pitman Vehicle Recalls

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2003-2007 LEXUS LX470 VEHICLES. THE CONSTRUCTION OF THE STEERING SHAFT IS SUCH THAT THE SNAP RING ON THE SHAFT MAY DISENGAGE WHEN THE VEHICLE EXPERIENCES AN UNUSUALLY SEVERE IMPACT TO THE FRONT WHEELS. IF THE SNAP RING BECOMES DISENGAGED AND THE STEERING WHEEL IS THEN REPEATEDLY TURNED TO THE LOCKED POSITION, OVER TIME THE STEERING SHAFT MAY BECOME DISCONNECTED.

FABTECH IS RECALLING CERTAIN AFTERMARKET REPLACEMENT PITMAN ARMS, P/NOS. FTS93001 AND FT44039, INSTALLED FOR USE ON CERTAIN 2003 THROUGH 2008 DODGE 2500 4WD, 3500 4WD, AND 1500 4WD MEGA CAB VEHICLES. THE PITMAN ARM CAN FRACTURE AND BREAK AWAY FROM THE STEERING BOX CAUSING TOTAL LOSS OF STEERING CONTROL.

NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2009 ROGUE VEHICLES. A SCREW IN THE STEERING GEAR HOUSING COVER MAY LOOSEN OVER TIME AND COULD FALL OUT. AS IT LOOSENS, THE STEERING RESPONSE OF THE VEHICLE MAY BE COMPROMISED BUT THE DRIVER WILL RETAIN STEERING CONTROL.

ON CERTAIN CHASSIS CAB TRUCKS, THE STEERING GEAR MAY HAVE SOME GEARS WITH A GEAR PISTON THAT WAS ASSEMBLED WITH AN INCORRECT RE-CIRCULATING BALL TUBE RETAINER. AN INCORRECT RETAINER MAY RESULT IN AN IMPROPERLY RETAINED RE-CIRCULATING BALL TUBE, WHICH MAY NOT KEEP THE RE-CIRCULATING BALLS IN PLACE DURING STEERING GEAR ACTUATION.

ON CERTAIN HEAVY-DUTY CLASS 8 TRUCKS, THE PINCH BOLT ATTACHING THE STEERING DRAG LINK TO THE PITMAN ARM MAY NOT HAVE BEEN SUFFICIENTLY TIGHTENED.

ON CERTAIN PICKUP TRUCKS, THE PITMAN ARM TO STEERING GEAR RETAINING NUT WAS NOT FULLY TIGHTENED TO THE REQUIRED SPECIFICATION.