Vehicle Speed Control › Accelerator Pedal Vehicle Recalls

Tesla, Inc. (Tesla) is recalling certain 2024 Cybertruck vehicles. The accelerator pedal pad may dislodge and cause the pedal to become trapped by the interior trim.

Rivian Automotive, LLC (Rivian) is recalling certain 2022 R1T and R1S vehicles. The accelerator pedal may not detect when the driver releases the pedal, failing to activate "auto-hold" or "park" as intended.

Chrysler (FCA US LLC) is recalling certain 2019-2020 Ram 1500 vehicles equipped with adjustable pedals. In certain accelerator pedal positions, the floormats may prevent the pedal from returning to the normal resting (idle) position.

Dorman Products, Inc. (Dorman) is recalling certain Accelerator Pedal Assemblies part numbers 699-114 and 825-5029-1, sold as replacement parts for 2003-2006 Acura MDX, 2004-2008 Acura TL and TSX, 2003-2007 Honda Accord, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot and 2006-2014 Honda Ridgeline vehicles. The rotating portion of the accelerator pedal assembly may bind. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 124, "Accelerator Control Systems."

Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain model year 2008-2009 and 2012-2013 Isuzu NPR and NPR HD vehicles and 2008-2009 GMC W3500 and GMC W4500 vehicles. The affected vehicles, equipped with a gasoline-powered engine, have a throttle pedal that may get stuck under the steel stopper bolt, causing the pedal to remain in the full throttle position.

Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain model year 2014-2016 Isuzu NPR and NPR HD vehicles manufactured August 26, 2013, to November 11, 2016, and 2016 Chevrolet Low Cab Forward 3500 and 4500 vehicles manufactured July 27, 2016, to November 11, 2016. The affected vehicles have a throttle pedal that may get stuck under the steel stopper bolt, causing the pedal to remain in the full throttle position. Note: In gasoline models only.

Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2015 Nissan Versa sedan vehicles manufactured June 9, 2011, to March 11, 2015, and 2014-2015 Nissan Versa Note vehicles manufactured April 23, 2013, to March 11, 2015. The affected vehicles have a center console trim panel that may catch the driver's shoe and delay the transition from the accelerator pedal to the brake pedal.

Kia Motors America (Kia) is recalling certain model year 2014-2015 Soul and Soul electric vehicles manufactured July 21, 2013, to January 8, 2015. A section of the accelerator pedal may bend and fracture.

Kia Motors America (Kia) is recalling certain model year 2016 Sorento vehicles manufactured October 27, 2014, to January 29, 2015. Due to an improperly soldered component in the accelerator pedal assembly, the driver may not be able to accelerate the vehicle.

Chrysler Group LLC (Chrysler) is recalling certain model year 2014 Dodge Durango vehicles manufactured January 16, 2014 to April 8, 2014, Jeep Grand Cherokee vehicles manufactured January 16, 2014 to April 8, 2014, Jeep Grand Cherokee SRT vehicles manufactured February 3, 2014 to April 8, 2014, and Jeep Cherokee vehicles manufactured March 6, 2014 to April 17, 2014. When the adaptive cruise control is engaged and the driver presses the accelerator pedal to increase the vehicle's speed more than the cruise control system would on its own, the vehicle may continue to accelerate briefly after the accelerator pedal is released.

Chrysler Group LLC (Chrysler) is recalling certain model year 2014 Ram ProMaster vehicles manufactured July 1, 2013, through December 10, 2013. In the affected vehicles, if the accelerator pedal is pushed downward at a certain angle, the pedal may get stuck in the wide open throttle position due to interference with the accelerator pedal stopper.

Toyota is recalling certain model year 2010 Lexus RX350 and RX450h vehicles, manufactured from November 28, 2008, through September 1, 2010, and model year 2008 through 2011 Toyota Land Cruiser vehicles manufactured from September 1, 2007, through September 5, 2011. In July 2012, Toyota filed a defect report to recall certain model year 2010 Lexus RX350 and RX450h vehicles. In November 2012, Toyota informed the agency that it was including an additional 10,565 vehicles including certain model year 2008 through 2011 Toyota Land Cruiser vehicles. The total number of vehicles being recalled is now 164,601. The accelerator pedal can get stuck in the wide open position due to its being trapped by an unsecured or incompatible driver's floor mat.

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 LEXUS LX570, 2003 THROUGH 2009 TOYOTA 4RUNNER, AND 2006 THROUGH 2010 RAV4 VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2006 HIGHLANDER, HIGHLANDER HYBRID, AND MODEL YEAR 2004-2007 LEXUS RX330, RX350, AND RX400H VEHICLES. IF THE FORWARD RETENTION CLIP USED TO SECURE THE FLOOR CARPET COVER, WHICH IS LOCATED IN FRONT OF THE CENTER CONSOLE, IS NOT INSTALLED PROPERLY THE COVER MAY LEAN TOWARD THE ACCELERATOR PEDAL AND INTERFERE WITH THE ACCELERATOR PEDAL ARM.

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2007 DODGE CALIBER AND JEEP COMPASS PASSENGER VEHICLES MANUFACTURED FROM MARCH 7 THROUGH MAY 19, 2006. THE PIVOT BUSHINGS IN VEHICLES WITH OVERSIZED ACCELERATOR PEDAL BEARING POCKETS MAY BECOME DISLODGED AND POTENTIALLY CAUSE THE ACCELERATOR PEDAL TO BIND OR STICK.

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008-2010 HIGHLANDER, MODEL YEAR 2009-2010 COROLLA, VENZA AND MATRIX PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT. THIS RECALL IS AN EXPANSION OF A CAMPAIGN OF 3.8 MILLION OTHER TOYOTA VEHICLES ANNOUNCED IN 2009 FOR THE SAME ISSUE (SEE 09V-388).

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES. DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION. IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.

TOYOTA IS CONDUCTING A SAFETY IMPROVEMENT CAMPAIGN INVOLVING 26,501 EARLY 2004 MY SIENNA VEHICLES. IN THE EVENT THE RETENTION CLIP USED TO SECURE THE FLOOR CARPET COVER IS MISSING, THE COVER CAN INTERFERE WITH THE OPERATION OF THE ACCELERATOR PEDAL IF THE ACCELERATION PEDAL IS DEPRESSED TO NEARLY THE FULL THROTTLE POSITION.

ON CERTAIN SPORT UTILITY AND HYBRID VEHICLES, THE TWO RETAINING CLIPS FOR THE DRIVER'S SIDE FORWARD CENTER CONSOLE CAN BECOME LOOSE. IF BOTH CLIPS SEPARATE FROM THE FLOOR CARPET COVER, THE COVER MAY LEAN TOWARD THE ACCELERATOR PEDAL, CAUSING INTERFERENCE WITH THE ACCELERATOR PEDAL ROD.

ON CERTAIN MUSTANG COBRA PASSENGER VEHICLES, THE REAR SURFACE OF THE ACCELERATOR PEDAL MAY COME INTO CONTACT WITH FLOOR CARPETING DURING HEAVY THROTTLE APPLICATION. THE UNIQUE SURFACE PROFILE OF THE ACCELERATOR PEDAL MAY CATCH IN THE CUTOUT ON THE FLOOR CARPETING BEHIND THE ACCELERATOR PEDAL.

CERTAIN PASSENGER VEHICLES, THE PEDAL WERE NOT PROPERLY INSTALLED AND MAY COME LOOSE AT THE FLOOR MOUNTING.

ON CERTAIN PASSENGER VEHICLES, THE ACCELERATOR PEDAL ARMS WERE INCORRECTLY ASSEMBLED BY THE SUPPLIER. THE CLEARANCE BETWEEN THE ACCELERATOR PEDAL AND THE BRAKE PEDAL MAY BE REDUCED. THIS CONDITION CAN INCREASE THE RISK OF BOTH PEDALS BEING OPERATED AT THE SAME TIME BY THE DRIVER.

CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 124, 'ACCELERATOR CONTROL SYSTEMS.' IF ONE OF THE TWO ACCELERATOR PEDAL RETURN SPRINGS FAILS AND THE TEMPERATURE IS -22 DEGREES F TO -40 DEGREES F, THE ENGINE MAY NOT RETURN TO IDLE WITHIN THREE SECONDS, AS REQUIRED.

CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 124, 'ACCELERATOR CONTROL SYSTEMS.' IN HOT AMBIENT CONDITIONS, THE ACCELERATOR PEDAL ARM MAY STICK AT THE ATTACHMENT TO THE BRACKET AND NOT RETURN TO THE ENGINE IDLE POSITION WHEN THE OPERATOR LIFTS HIS FOOT FROM THE ACCELERATOR PEDAL.

VEHICLE DESCRIPTION: MINIVANS EQUIPPED WITH AN ADJUSTABLE PEDAL OPTION. THE DRIVER FLOOR MAT COULD INTERFERE WITH THE ACCELERATOR PEDAL.