Skip to main content
MyRecallCheckNHTSA recall explorer

NHTSA model-year recall report

2001 BMW 325I Recalls

7 campaigns in our verified NHTSA snapshot, with source consequences, remedies, and VIN-specific next steps.

Urgent NHTSA instruction

Park It advisory found

2 campaigns tell owners not to drive affected vehicles. Read the highlighted campaign details below and confirm applicability to your VIN immediately.

7

NHTSA campaigns

6

Affected systems

2

Urgent advisories

Jan 15, 2020

Latest campaign date

At a glance

What the record says

This model year's count is above the BMW 325I average of 4.0 campaigns per listed year. That is context only—not proof that this year is safer or less safe.

The most frequent affected category is Engine And Engine Cooling › Cooling System › Fan, appearing in 2 campaigns.

  1. 1

    Read

    Review every campaign and urgent instruction below.

  2. 2

    Verify

    Check your exact VIN with NHTSA or the manufacturer.

  3. 3

    Repair

    Contact an authorized dealer if a campaign applies.

Source campaign records

All 2001 BMW 325I recall campaigns

Shown newest first. NHTSA summary, consequence, and remedy text is preserved without truncation.

NHTSA Park It instruction

NHTSA campaign 20V018000

Air Bags › Frontal › Passenger Side › Inflator Module

Manufacturer: BMW of North America, LLC

Reported Jan 15, 2020

What is recalled

BMW of North America, LLC (BMW) is recalling certain 2000-2005 323iT, 325iT, 325xiT, 320i, 323i, 325i, 325xi, 328i, 330i and 330xi and 2000-2006 323Ci, 325Ci, 328Ci, 330Ci, M3 Coupe, 323Cic, 325Cic, 330Cic, and M3 Convertible vehicles equipped with non-desiccated frontal Takata PSAN inflators and PSPI passenger frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) propellant that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Safety consequence

An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

Manufacturer remedy

BMW will notify owners, and dealers will replace the passenger's front air bag, free of charge. The recall began February 13, 2020. Owners may contact BMW customer service at 1-800-525-7417.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 19V853000

Air Bags › Frontal › Driver Side › Inflator Module

Manufacturer: BMW of North America, LLC

Reported Nov 26, 2019

What is recalled

BMW of North America, LLC (BMW) is recalling certain 1999-2001 323i, 325i, 328i and 330i and 2000-2001 323Ci, 325Ci, 328Ci, 330Ci, 323iT, and 325iT vehicles equipped with Non-Azide Driver air bag Inflators (NADI) manufactured by Takata. These vehicles may have received a replacement driver air bag as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.

Safety consequence

In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant. These scenarios increase the risk of serious injury or death.

Manufacturer remedy

BMW notified owners, and Dealers will replace the driver air bag inflators, free of charge. The recall began November 10, 2020. Owners may contact BMW customer service at 1-800-525-7417.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details
NHTSA Park It instruction

NHTSA campaign 14V428000

Air Bags

Manufacturer: BMW of North America, LLC

Reported Jun 11, 2018

What is recalled

BMW of North America, LLC (BMW) is recalling certain model year 2000 323i sedans, coupes, convertibles, and Sports Wagons; 2000 328i sedans and coupes; 2001-2005 325i sedans, coupes, convertibles, and Sport Wagons; 2001-2005 325xi sedans and Sports Wagons; 2006 325i coupes and convertibles; 2001-2006 330i sedans, coupes, and convertibles; 2001-2005 330xi sedans; and 2001-2006 M3 coupes and convertibles to address a safety defect in the passenger side frontal air bag which may produce excessive internal pressure that could cause the air bag inflator to rupture upon deployment of the air bag.

Safety consequence

In the event of a crash necessitating deployment of the passenger's frontal air bag, excessive internal pressure could cause rupturing of the inflator resulting in metal fragments striking and potentially seriously injuring the passenger seat occupant or other occupants.

Manufacturer remedy

Owners are advised not to drive their vehicles until they have been repaired. BMW will notify owners, and dealers will replace the passenger side frontal air bag, free of charge. An interim notice was mailed to owners in September 2014. A second notice was mailed when an adequate supply of parts became available, on December 1, 2014. Owners may contact BMW customer service at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 07E023000

Service Brakes, Hydraulic › Foundation Components › Master Cylinder

Manufacturer: CARDONE INDUSTRIES, INC.

Reported Mar 29, 2007

What is recalled

CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.

Safety consequence

LOSS OF BRAKE FLUID CAN RESULT IN POOR BRAKING PERFORMANCE, POSSIBLY RESULTING IN A VEHICLE CRASH.

Manufacturer remedy

CARDONE WILL NOTIFY OWNERS AND OFFER TO REPURCHASE ANY DEFECTIVE MASTER CYLINDERS. THE RECALL BEGAN DURING APRIL 2007. OWNERS CAN CONTACT CARDONE AT 1-800-777-4780.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 02V138000

Engine And Engine Cooling › Cooling System › Fan

Manufacturer: BAYERISCHE MOTOREN WERKE

Reported May 16, 2002

What is recalled

ON CERTAIN PASSENGER VEHICLES, THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

Safety consequence

IF THIS WERE TO OCCUR, ENGINE OVERHEATING AND SUBSEQUENT ENGINE DAMAGE COULD RESULT. IN ADDITION, IT IS POSSIBLE FOR THE FAILURE OF THE ELECTRICAL CIRCUITRY TO CAUSE A FIRE IN THE FAN CONTROL UNIT LOCATED IN THE FRONT OF THE ENGINE COMPARTMENT.

Manufacturer remedy

DEALERS WILL REPLACE THE FAN. OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2001. THIS IS A SUPPLEMENT TO A RECALL THAT BEGAN DURING SEPTEMBER 2001 (SEE RECALL CAMPAIGN 01V206). OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 01V206000

Engine And Engine Cooling › Cooling System › Fan

Manufacturer: BAYERISCHE MOTOREN WERKE

Reported Jun 21, 2001

What is recalled

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

Safety consequence

IF THIS WERE TO OCCUR, ENGINE OVERHEATING AND SUBSEQUENT ENGINE DAMAGE COULD RESULT. IN ADDITION, IT IS POSSIBLE FOR THE FAILURE OF THE ELECTRICAL CIRCUITRY TO CAUSE A FIRE IN THE FAN CONTROL UNIT LOCATED IN THE FRONT OF THE ENGINE COMPARTMENT.

Manufacturer remedy

DEALERS WILL REPLACE THE FAN. OWNER NOTIFICATION BEGAN SEPTEMBER 28, 2001. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BMW AT 1-800-831-1117.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 00V383000

Wheels › Rim

Manufacturer: BAYERISCHE MOTOREN WERKE

Reported Nov 20, 2000

What is recalled

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE MACHINE USED TO MOUNT AND INFLATE THE TIRES ON THE WHEELS AT THE ASSEMBLY PLANT MAY HAVE DAMAGED THE INNER RIM FLANGE OF THE WHEELS.

Safety consequence

THIS COULD LEAD TO A SUDDEN LOSS OF AIR FROM THE TIRE AFFECTING HANDLING AND VEHICLE CONTROL.

Manufacturer remedy

DEALERS WILL INSPECT THE FIVE WHEELS FOR POSSIBLE DAMAGE. IF DAMAGE FROM THE MOUNTING MACHINE IS FOUND ON ANY WHEEL, ALL FIVE WHEELS WILL BE REPLACED.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

Other BMW 325I model years

Compare campaign histories within the same model. Counts are descriptive, not a safety grade.

View all model years

Other 2001 BMW recall reports

2001 BMW 325I recall questions

How many recalls does the 2001 BMW 325I have?

This verified dataset contains 7 NHTSA campaigns associated with the 2001 BMW 325I. A campaign can apply to some, not all, vehicles of the same model year.

Does this confirm an open recall for my 2001 BMW 325I?

No. This page is a model-year campaign history. Use NHTSA's official lookup or an authorized dealer to confirm whether a campaign applies to your exact VIN and whether the repair remains open.

Are vehicle recall repairs free?

When a safety recall campaign applies to your VIN, the manufacturer remedy is generally provided at no charge through an authorized dealer. Confirm eligibility and scheduling with the manufacturer or dealer.

Source: NHTSA. Dataset includes campaigns through Jul 30, 2026. Last processed Aug 8, 2026. Methodology