Skip to main content
MyRecallCheckNHTSA recall explorer

NHTSA model-year recall report

2002 Honda GL1800A Recalls

4 campaigns in our verified NHTSA snapshot, with source consequences, remedies, and VIN-specific next steps.

Check exact VIN status Decode a VIN

4

NHTSA campaigns

4

Affected systems

0

Urgent advisories

Oct 23, 2015

Latest campaign date

At a glance

What the record says

This model year's count is above the Honda GL1800A average of 3.3 campaigns per listed year. That is context only—not proof that this year is safer or less safe.

The most frequent affected category is Service Brakes, Hydraulic › Foundation Components › Master Cylinder, appearing in 1 campaign.

  1. 1

    Read

    Review every campaign and urgent instruction below.

  2. 2

    Verify

    Check your exact VIN with NHTSA or the manufacturer.

  3. 3

    Repair

    Contact an authorized dealer if a campaign applies.

Source campaign records

All 2002 Honda GL1800A recall campaigns

Shown newest first. NHTSA summary, consequence, and remedy text is preserved without truncation.

NHTSA campaign 15V700000

Service Brakes, Hydraulic › Foundation Components › Master Cylinder

Manufacturer: Honda (American Honda Motor Co.)

Reported Oct 23, 2015

What is recalled

American Honda Motor Co., Inc. (Honda) is recalling certain model year 2001-2010 and 2012-2015 GL1800, 2001-2005 GL1800A and 2013-2015 GL1800B motorcycles. The rear brakes of the affected motorcycles may drag after the brakes are released.

Safety consequence

A rear brake that drags may increase the risk of a vehicle crash. Additionally, extended riding with the rear brake dragging could generate enough heat to result in a fire.

Manufacturer remedy

Honda will notify owners, and dealers will replace the secondary brake master cylinder and the rear brake master cylinder, and flush the brake fluid, free of charge. The recall began on December 7, 2015. Owners may contact Honda customer service at 1-866-784-1870. Honda's number for this recall is JV6. Note: This recall supercedes recall 14V-472.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 05V027000

Structure › Frame And Members

Manufacturer: HONDA (AMERICAN HONDA MOTOR CO.)

Reported Jan 31, 2005

What is recalled

ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.

Safety consequence

THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL INSPECT AND, IF NECESSARY, REINFORCE THE WELDS ON 2001-2002 MOTORCYCLES FREE OF CHARGE. ON 2003-2004 MOTORCYCLES, THE UNITS WILL BE REPAIRED, NO INSPECTION WILL BE NECESSARY. THE RECALL BEGAN ON FEBRUARY 9, 2005. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 05V010000

Service Brakes, Hydraulic

Manufacturer: HONDA (AMERICAN HONDA MOTOR CO.)

Reported Jan 24, 2005

What is recalled

CERTAIN MOTORCYCLES EQUIPPED WITH COMBINED-BRAKE SYSTEMS HAVE A PROPORTIONING CONTROL VALVE (PCV) THAT MECHANICALLY PROPORTIONS BRAKE FORCE WHEN THE REAR BRAKE IS APPLIED. A SEAL IN SOME PCVS IS IMPROPERLY SHAPED, AND BRAKE FLUID LEAKAGE MAY OCCUR.

Safety consequence

IF THE MOTORCYCLE CONTINUES TO BE USED AFTER A LEAK OCCURS, THE REAR BRAKE WOULD EVENTUALLY BECOME INOPERATIVE. A LOSS OF REAR BRAKE FORCE COULD INCREASE THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL INSPECT THE REAR BRAKE FORLEAKAGE. IF LEAKAGE IS CONFIRMED, THE DEALER WILL REPLACE THE PCV FREE OF CHARGE. THE RECALL BEGAN ON JANUARY 31, 2005. OWNERS MAY CONTACT HONDA AT 866-784-1870.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 03V350000

Structure › Frame And Members › Underbody Shields

Manufacturer: AMERICAN HONDA MOTOR CO.

Reported Sep 26, 2003

What is recalled

ON SOME MOTORCYCLES, CERTAIN FRAME WELDS DO NOT MEET MANUFACTURING SPECIFICATIONS. HIGH LOADS CREATED WHEN RIDING ON ROUGH ROAD SURFACES OR THROUGH POTHOLES CAN CAUSE THE AFFECTED WELDS TO CRACK.

Safety consequence

THE WELDED AREA COULD BREAK, RESULTING IN REAR SUSPENSION COLLAPSE OR LOWER CROSS MEMBER SEPARATION, INCREASING THE RISK OF A CRASH.

Manufacturer remedy

DEALERS WILL INSPECT AND REINFORCE THE WELDS ON ALL FRAMES. OWNER NOTIFICATION BEGAN DURING OCTOBER 2003. OWNERS SHOULD CONTACT HONDA AT 1-866-784-1870.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

Other Honda GL1800A model years

Compare campaign histories within the same model. Counts are descriptive, not a safety grade.

20043 campaigns20034 campaigns20024 campaigns20012 campaigns
View all model years

Other 2002 Honda recall reports

2002 Honda Civic24 campaigns2002 Honda Accord16 campaigns2002 Honda CR-V16 campaigns2002 Honda Odyssey10 campaigns2002 Honda GL18007 campaigns2002 Honda FSC6003 campaigns

2002 Honda GL1800A recall questions

How many recalls does the 2002 Honda GL1800A have?

This verified dataset contains 4 NHTSA campaigns associated with the 2002 Honda GL1800A. A campaign can apply to some, not all, vehicles of the same model year.

Does this confirm an open recall for my 2002 Honda GL1800A?

No. This page is a model-year campaign history. Use NHTSA's official lookup or an authorized dealer to confirm whether a campaign applies to your exact VIN and whether the repair remains open.

Are vehicle recall repairs free?

When a safety recall campaign applies to your VIN, the manufacturer remedy is generally provided at no charge through an authorized dealer. Confirm eligibility and scheduling with the manufacturer or dealer.

Source: NHTSA. Dataset includes campaigns through Jul 30, 2026. Last processed Aug 8, 2026. Methodology