Skip to main content
MyRecallCheckNHTSA recall explorer

NHTSA model-year recall report

2010 Toyota Highlander Hybrid Recalls

4 campaigns in our verified NHTSA snapshot, with source consequences, remedies, and VIN-specific next steps.

4

NHTSA campaigns

4

Affected systems

0

Urgent advisories

Oct 22, 2015

Latest campaign date

At a glance

What the record says

This model year's count is below the Toyota Highlander Hybrid average of 4.4 campaigns per listed year. That is context only—not proof that this year is safer or less safe.

The most frequent affected category is Visibility › Power Window Devices And Controls, appearing in 1 campaign.

  1. 1

    Read

    Review every campaign and urgent instruction below.

  2. 2

    Verify

    Check your exact VIN with NHTSA or the manufacturer.

  3. 3

    Repair

    Contact an authorized dealer if a campaign applies.

Source campaign records

All 2010 Toyota Highlander Hybrid recall campaigns

Shown newest first. NHTSA summary, consequence, and remedy text is preserved without truncation.

NHTSA campaign 15V689000

Visibility › Power Window Devices And Controls

Manufacturer: Toyota Motor Engineering & Manufacturing

Reported Oct 22, 2015

What is recalled

Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.

Safety consequence

If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.

Manufacturer remedy

Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 13V396000

Hybrid Propulsion System › Inverter

Manufacturer: Toyota Motor Engineering & Manufacturing

Reported Sep 4, 2013

What is recalled

Toyota is recalling certain model year 2006-2010 Highlander hybrid vehicles manufactured February 16, 2005, through July 29, 2010; and model year 2006-2008 Lexus RX400h vehicles manufactured February 23, 2005, through December 2, 2008. The Intelligent Power Module (IPM) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. If this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.

Safety consequence

The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. It is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.

Manufacturer remedy

Toyota will notify owners, and dealers will replace the IPM free of charge. Owners may contact Toyota at 1-800-331-4331. Vehicles that had their IPM replaced under recall 11V-342 are not affected by this campaign.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 13V123000

Equipment › Other › Labels

Manufacturer: Southeast Toyota Distributors, LLC

Reported Apr 9, 2013

What is recalled

Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 110, "Tire Selection and Rims."

Safety consequence

An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.

Manufacturer remedy

Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

NHTSA campaign 13V014000

Air Bags › Frontal › Sensor / Control Module-inactive

Manufacturer: Southeast Toyota Distributors, LLC

Reported Jan 16, 2013

What is recalled

Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.

Safety consequence

If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.

Manufacturer remedy

Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.

Campaign history does not confirm applicability or repair status for one VIN.

Campaign details

Other Toyota Highlander Hybrid model years

Compare campaign histories within the same model. Counts are descriptive, not a safety grade.

View all model years

Other 2010 Toyota recall reports

2010 Toyota Highlander Hybrid recall questions

How many recalls does the 2010 Toyota Highlander Hybrid have?

This verified dataset contains 4 NHTSA campaigns associated with the 2010 Toyota Highlander Hybrid. A campaign can apply to some, not all, vehicles of the same model year.

Does this confirm an open recall for my 2010 Toyota Highlander Hybrid?

No. This page is a model-year campaign history. Use NHTSA's official lookup or an authorized dealer to confirm whether a campaign applies to your exact VIN and whether the repair remains open.

Are vehicle recall repairs free?

When a safety recall campaign applies to your VIN, the manufacturer remedy is generally provided at no charge through an authorized dealer. Confirm eligibility and scheduling with the manufacturer or dealer.

Source: NHTSA. Dataset includes campaigns through Jul 30, 2026. Last processed Aug 8, 2026. Methodology