Steering › Steering Wheel / Handle Bar Vehicle Recalls

Honda (American Honda Motor Co.) is recalling certain 2017-2023, 2025 CMX500, 2017-2023, 2025-2026 CMX300, and 2025 Honda SCL500 motorcycles. The handlebar lock screw may loosen and detach.

Honda (American Honda Motor Co.) is recalling certain 2023-2025 CMX300, CMX500, and CL500 motorcycles. The handlebar lock screw may loosen and detach.

Tesla, Inc. (Tesla) is recalling certain 2021-2024 Model S and Model X vehicles. An incorrect air bag may have been installed when the steering yoke or round steering wheel was replaced with a different style of yoke or steering wheel.

Ford Motor Company (Ford) is recalling certain 2022 F-53 Motorhome Stripped Chassis, and F-59 Commercial Stripped Chassis vehicles. The steering wheel attachment bolt may loosen and separate from the steering column, resulting in a loose or detached steering wheel.

Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2021-2022 C-Class, E-Class, S-Class, SL, EClass Coupe/Convertible, CLS, AMG GT 4-doors Coupe, and EQS vehicles with a heated leather steering wheel. Due to a software error in the hand detection control unit, the hands-off detection might not detect when the driver's hands are away from the steering wheel when using the Active Distance Assist DISTRONIC system.

Ford Motor Company (Ford) is recalling certain 2014-2018 Lincoln MKZ and Ford Fusion vehicles. The steering wheel retaining bolt may loosen allowing the steering wheel to detach while driving.

Hyundai Motor America (Hyundai) is recalling certain 2018 Hyundai Santa Fe and Santa Fe Sport vehicles. The steering wheel assembly may break, possibly resulting in the steering wheel separating from the steering column while driving.

General Motors is recalling certain model year 2013 Buick Encore vehicles manufactured between December 9, 2012 and December 28, 2012, and equipped with a heated steering wheel. The steering wheel fastener may not have been properly installed. This could cause the steering wheel to come loose or separate from the steering column.

ON CERTAIN MOTORCYCLES, THE CLAMPING BLOCKS AND THE TOP FORK BRIDGE WERE NOT MANUFACTURED ACCORDING TO SPECIFICATIONS. CONSEQUENTLY, THE HANDLEBARS MIGHT NOT BE HELD SECURELY IN POSITION.

ON CERTAIN SCOOTERS, EXCESSIVE CLEARANCE BETWEEN THE LOWER HANDLEBAR CLAMP AND HANDLEBAR HOLDER CREATES STRESS THAT CAN EVENTUALLY CAUSE THE HANDLEBAR TO LOOSEN OR DETACH.

ON CERTAIN HEAVY DUTY CLASS 8 AXLE BACK VEHICLES, THE TELESCOPING STEERING SHAFT IN SOME DRIVING SITUATIONS COULD BOTTOM OUT AND SIDE LOAD THE STEERING GEAR INPUT SHAFT WHENEVER THE ADJUSTABLE STEERING COLUMN IS ADJUSTED TO THE LOWER POSITION.

VEHICLE DESCRIPTION: MOTORCYCLES EQUIPPED WITH HIGH-MOUNTED HANDLEBARS. THE HIGH-MOUNTED HANDLEBARS ARE POSITION ON TOP OF THE UPPER FORK CLAMP AND ARE CLAMPED TO THE TOP OF EACH UPPER FORK TUBE. IT IS POSSIBLE FOR A HANDLEBAR TO ROTATE FORWARD.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THESE VEHICLES MAY HAVE A MIS-ASSEMBLED OR INCORRECTLY MANUFACTURED NUT THAT ATTACHES THE STEERING WHEEL ASSEMBLY TO THE STEERING COLUMN. THE NUT COULD BE UPSIDE DOWN IN THE STEERING WHEEL ASSEMBLY, WHICH COULD OVERSTRESS THE STEERING COLUMN SHAFT WHEN THE NUT IS TIGHTENED. IN ADDITION, SOME OF THE NUTS MAY HAVE BEEN CRACKED DURING MANUFACTURE RESULTING IN THE NUT FRACTURING WHEN IT IS TIGHTENED DURING VEHICLE ASSEMBLY.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THESE VEHICLES MAY HAVE A MIS-ASSEMBLED OR INCORRECTLY MANUFACTURED NUT THAT ATTACHES THE STEERING WHEEL ASSEMBLY TO THE STEERING COLUMN. THE NUT COULD BE UPSIDE DOWN IN THE STEERING WHEEL ASSEMBLY, WHICH COULD OVERSTRESS THE STEERING COLUMN SHAFT WHEN THE NUT IS TIGHTENED. IN ADDITION, SOME OF THE NUTS MAY HAVE BEEN CRACKED DURING MANUFACTURE RESULTING IN THE NUT FRACTURING WHEN IT IS TIGHTENED DURING VEHICLE ASSEMBLY.

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE LOWER STEERING SHAFT COUPLING INCLUDES A PLASTIC COLLAR WHICH FITS OVER THE LOWER STEERING RACK INPUT SHAFT. THIS COLLAR IS PUSHED DOWN ONTO THE STEERING RACK AND TIGHTENED DURING ASSEMBLY. ON SOME OF THE AFFECTED VEHICLES, THE COLLAR MAY NOT HAVE BEEN PUSHED DOWN FULLY ONTO THE RACK AT THE ASSEMBLY PLANT.